Hummer H2. Manual — part 529
Fig. 60: Lock Cylinder Rod
Courtesy of GENERAL MOTORS CORP.
5. Disconnect the lock cylinder rod (1) by releasing the retainer clip.
6. Apply a piece of masking tape across the door handle, on the outside of the door, to secure the handle
while removing the fasteners.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Fig. 61: Front Outside Door Handle
Courtesy of GENERAL MOTORS CORP.
7. Remove the 3 nuts (1) retaining the door handle.
8. Remove the door handle.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
1. Position the door handle in place on the door.
Fig. 62: Front Outside Door Handle
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
2. Install the 3 nuts (1) that retain the door handle to the door.
Tighten: Tighten the nuts to 9 N.m (7 lb ft).
Fig. 63: Front Outside Door Handle Rod
Courtesy of GENERAL MOTORS CORP.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст