Hummer H2. Manual — part 1710
Fig. 45: Engine Mount (Right)
Courtesy of GENERAL MOTORS CORP.
1. Position the right engine mount to the engine. (Left side shown, right side similar).
2. Install the engine mount bolts.
Tighten: Tighten the engine mount bolts to 50 N.m (37 lb ft).
3. Lower the engine.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
4. Remove the adjustable jack stands.
5. Install the starter motor. Refer to Starter Motor Replacement in Engine Electrical.
6. Install the A/C compressor. Refer to Compressor Replacement in Heating, Ventilation, and Air
Conditioning.
Fig. 46: Engine Shield Bolts (Right)
Courtesy of GENERAL MOTORS CORP.
7. Position the engine shield to the vehicle.
8. Install the engine shield bolts.
Tighten: Tighten the engine shield bolts to 30 N.m (22 lb ft).
9. Lower the vehicle.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 47: Engine Mount-To-Frame Bracket Bolts (Right)
Courtesy of GENERAL MOTORS CORP.
10. Install the engine mount-to-frame bracket bolts.
Tighten: Tighten the engine mount-to-frame bracket bolts to 65 N.m (48 lb ft).
ENGINE MOUNT BRACKET REPLACEMENT - RIGHT
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Removal Procedure
Fig. 48: Engine Mount Bracket (Right)
Courtesy of GENERAL MOTORS CORP.
1. Remove the engine mount. Refer to Engine Mount Replacement - Right .
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.
Installation Procedure
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст