Hummer H2. Manual — part 2288
Fig. 186: Removing Converter Housing & Bolts
Courtesy of GENERAL MOTORS CORP.
1. Remove the converter housing bolts (94). Use the J 41510 . See Special Tools and Equipment .
2. Remove the converter housing (102).
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
2-4 SERVO COVER AND ASSEMBLY REMOVAL
Tools Required
J 29714-A Servo Cover Compressor. See Special Tools and Equipment .
Fig. 187: Installing J 29714-A
Courtesy of GENERAL MOTORS CORP.
1. Install the J 29714-A . See Special Tools and Equipment .
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 188: Tightening J 29714-A Bolt To Compress Servo Cover
Courtesy of GENERAL MOTORS CORP.
2. Tighten the J 29714-A bolt to compress the servo cover. See Special Tools and Equipment .
IMPORTANT: If cover does not move inwards with tool, use a block of wood or suitable
material and lightly tap on cover using a hammer to free up cover in bore.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 189: Servo Cover Retaining Ring & J 29714-A
Courtesy of GENERAL MOTORS CORP.
3. Remove the servo cover retaining ring (29) and the J 29714-A . See Special Tools and Equipment .
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст