Hummer H2. Manual — part 971
Fig. 83: Installing J 8614-2 & J 8614-3 Into J 8614-01
Courtesy of GENERAL MOTORS CORP.
32. Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01 (1) as shown. See Special Tools and
Equipment .
33. Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J 8614-01 (1). See
Special Tools and Equipment .
34. Remove the pinion oil seal using a suitable seal removal tool.
IMPORTANT: Carefully pry the seal from the bore. Do not distort or scratch the
aluminum case.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Fig. 84: Installing J 45765 To Left Side Differential Carrier Case Half Over Drive Pinion
Courtesy of GENERAL MOTORS CORP.
35. Install the J 45765 to the left side differential carrier case half over the drive pinion as shown. See
Special Tools and Equipment .
36. Turn the forcing screw of the J 45765 clockwise to remove the following components from the left side
differential carrier case half:
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
z
The drive pinion gear
z
The pinion gear selectable shim
z
The inner pinion bearing
z
The collapsible spacer
37. Remove the collapsible spacer from the pinion.
38. Remove the outer pinion bearing from the differential carrier case half.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Fig. 85: Removing The Inner Pinion Bearing Using J 22912-01
Courtesy of GENERAL MOTORS CORP.
39. Remove the inner pinion bearing by installing the J 22912-01 between the pinion bearing and the pinion
gear and pressing the bearing off the pinion. See Special Tools and Equipment .
40. Remove the pinion gear selectable shim.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст