Hummer H2. Manual — part 773
Fig. 19: Traction Control Switch & I/P Assembly
Courtesy of GENERAL MOTORS CORP.
1. Remove the center I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center
in Instrument Panel, Gauges and Console.
2. Gently lift the retaining tabs and remove the traction control switch (1) from the instrument panel (I/P)
assembly (2).
3. Disconnect the harness connector from the traction control switch (1).
Installation Procedure
2004 Hummer H2
2004 BRAKES Anti-Lock Brake System - Hummer H2
Fig. 20: Traction Control Switch & I/P Assembly
Courtesy of GENERAL MOTORS CORP.
1. Connect the harness connector to the traction control switch (1).
2. Install the traction control switch (1) into the I/P assembly (2).
3. Ensure that the switch (1) is secure into both retaining tabs.
4. Install I/P bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument
Panel, Gauges and Console.
LONGITUDINAL ACCELEROMETER REPLACEMENT
Removal Procedure
2004 Hummer H2
2004 BRAKES Anti-Lock Brake System - Hummer H2
Fig. 21: Longitudinal Accelerometer
Courtesy of GENERAL MOTORS CORP.
1. Remove the center I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center
in Instrument Panel, Gauges and Console.
2. Remove the longitudinal accelerometer retaining screws.
2004 Hummer H2
2004 BRAKES Anti-Lock Brake System - Hummer H2
3. Remove the longitudinal accelerometer.
Installation Procedure
Fig. 22: Longitudinal Accelerometer
Courtesy of GENERAL MOTORS CORP.
2004 Hummer H2
2004 BRAKES Anti-Lock Brake System - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст