Hummer H2. Manual — part 1764
Fig. 248: Automatic Transmission Oil Level Indicator Tube (Without RPO HP2)
Courtesy of GENERAL MOTORS CORP.
17. Install the automatic transmission oil level indicator tube.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 249: Automatic Transmission Oil Indicator Tube Nut
Courtesy of GENERAL MOTORS CORP.
18. Install the automatic transmission oil level indicator tube nut.
Tighten: Tighten the automatic transmission oil level indicator tube nut to 18 N.m (13 lb ft).
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 250: Flywheel-To-Torque Converter Bolts
Courtesy of GENERAL MOTORS CORP.
19. Install the flywheel to torque converter bolts.
Tighten: If equipped with a 4L60E transmission, tighten the bolts to 63 N.m (47 lb ft).
20. Install exhaust pipes to the exhaust manifolds.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 251: Positive Battery Cable Clip & Bolt
Courtesy of GENERAL MOTORS CORP.
21. Install the positive battery cable clip and bolt.
Tighten: Tighten the positive battery cable clip bolt to 9 N.m (80 lb in).
22. Install the starter motor. Refer to Starter Motor Replacement in Engine Electrical.
23. Install the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and
Underbody.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст