Hummer H2. Manual — part 2460
4. Inspect transmission oil cooler lines for damage or kinks that could cause restricted oil flow. Repair as
needed and refer to the appropriate GM service manual procedures.
Minimum Flow Rate in Gallons Per Minute (GPM)
Back Flush Procedure
Temperature Range
Steel
Aluminum
65-66°F
0.6 gpm
0.5 gpm
67-70°F
0.7 gpm
0.6 gpm
71-75°F
0.8 gpm
0.7 gpm
76-80°F
0.9 gpm
0.8 gpm
81-84°F
1.0 gpm
0.9 gpm
85-89°F
1.1 gpm
1.0 gpm
90-94°F
1.2 gpm
1.1 gpm
95-98°F
1.3 gpm
1.2 gpm
99-103°F
1.4 gpm
1.3 gpm
104-108°F
1.5 gpm
1.4 gpm
109-112°F
1.6 gpm
1.5 gpm
113-117°F
1.7 gpm
1.6 gpm
118-120°F
1.8 gpm
1.7 gpm
2004 Hummer H2
2004 TRANSMISSION Automatic Transaxle - 4L60-E/4L65-E (Troubleshooting)
Fig. 14: Connecting J 45096 Adapters To Vehicle's Transmission Oil Cooler Supply & Return
Lines
Courtesy of GENERAL MOTORS CORP.
1. Connect the J 45096 adapters (1) to the vehicle's transmission oil cooler supply and return lines at the
transmission, may require J 35944-200 .
2004 Hummer H2
2004 TRANSMISSION Automatic Transaxle - 4L60-E/4L65-E (Troubleshooting)
Fig. 15: Connecting Black Supply Hose & Clear Waste Hose
Courtesy of GENERAL MOTORS CORP.
2. Connect the black supply hose (1) to the return line, top connector of the transmission, and the clear
waste hose (2) to the feed line, bottom connector of the transmission, to the vehicle cooler lines. This is
the reverse flow-backflush direction.
2004 Hummer H2
2004 TRANSMISSION Automatic Transaxle - 4L60-E/4L65-E (Troubleshooting)
Fig. 16: Turning Main Function Switch To FLUSH Position
Courtesy of GENERAL MOTORS CORP.
3. Turn the main function switch to the FLUSH position. Allow the machine to operate for 30 seconds.
2004 Hummer H2
2004 TRANSMISSION Automatic Transaxle - 4L60-E/4L65-E (Troubleshooting)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст