Hummer H2. Manual — part 839
Fig. 44: Right Rear Cable & Cable Support
Courtesy of GENERAL MOTORS CORP.
6. Install the right rear cable (1) to the cable support (2).
2004 Hummer H2
2004 BRAKES Park Brake - Hummer H2
Fig. 45: Right Rear Park Brake Cable & Equalizer
Courtesy of GENERAL MOTORS CORP.
7. Install the right rear cable to the equalizer.
8. Remove the safety stands.
9. Lower the vehicle.
10. Enable the park brake cable automatic adjuster. Refer to Enabling the Park Brake Cable Automatic
Adjuster .
PARK BRAKE CABLE GUIDE REPLACEMENT
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2004 Hummer H2
2004 BRAKES Park Brake - Hummer H2
Fig. 46: Park Brake Cable Guide
Courtesy of GENERAL MOTORS CORP.
3. Remove the park brake cable guide bolt.
4. Remove the park brake cable guide (2).
5. Remove the park brake guide from the park brake cable.
Installation Procedure
2004 Hummer H2
2004 BRAKES Park Brake - Hummer H2
Fig. 47: Park Brake Cable Guide
Courtesy of GENERAL MOTORS CORP.
1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide (2).
3. Install the park brake cable guide bolt.
Tighten: Tighten the bolt to 12 N.m (106 lb in).
4. Remove the safety stands.
5. Lower the vehicle.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 BRAKES Park Brake - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст