Hummer H2. Manual — part 377
Fig. 14: I/P Extension Trim Plate
Courtesy of GENERAL MOTORS CORP.
1. Align and tighten the screws that hold the I/P extension trim plate with the I/P.
Tighten: Tighten the screws to 2 N.m (18 lb in).
2. Align and fasten the I/P corner trim panel with the I/P. Refer to Trim Panel Replacement - Instrument
Panel (I/P) Center .
3. Align and move forward the center console into place and fasten to the center console bracket. Refer to
Console Replacement .
TRIM PANEL REPLACEMENT - KNEE BOLSTER
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Removal Procedure
1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement .
2. Remove the instrument panel cluster (IPC) trim. Refer to Trim Panel Replacement - Instrument Panel
(I/P) Cluster .
Fig. 15: Knee Bolster Trim Panel
Courtesy of GENERAL MOTORS CORP.
3. Remove the screws/bolts that hold knee bolster trim panel to I/P.
4. Remove the knee bolster trim.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Installation Procedure
Fig. 16: Knee Bolster Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Install the knee bolster trim panel to I/P.
2. Install the knee bolster trim panel screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
3. Install the IPC trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
4. Align and move forward center console in place and fasten to center console bracket. Refer to Console
Replacement .
TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY RIGHT
Removal Procedure
Fig. 17: I/P Accessory Right Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Remove the I/P (Instrument Panel) compartment. Refer to Compartment Replacement - Instrument
Panel (I/P) .
2. Remove the I/P assist handle. Refer to Instrument Panel (I/P) Assist Handle Replacement .
3. Remove the screws that hold the trim panel to the I/P.
4. Remove the trim from the tabs in the I/P.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст