Hummer H2. Manual — part 282

Fig. 30: Antenna Extension Cable & Antenna Cable
Courtesy of GENERAL MOTORS CORP.

4. Connect the antenna extension cable (2) to the antenna cable (1).

5. Install the right kick-up panel. Refer to Kick-Up Panel Replacement - Front Floor in Interior Trim.

6. Install the right sill plate. Refer to Door Sill Plate Replacement - Front in Interior Trim.

ANTENNA CABLE REPLACEMENT

Removal Procedure

1. Open the hood.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Entertainment - Hummer H2

Fig. 31: Front Fender Upper Hole Cover
Courtesy of GENERAL MOTORS CORP.

2. Remove the antenna mast boot (1).

3. Remove the antenna mast (2).

4. Remove the 2 screws (3) retaining the front fender upper hole cover.

5. Remove the front fender upper hole cover (4).

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Entertainment - Hummer H2

Fig. 32: Fastener & Mast Base
Courtesy of GENERAL MOTORS CORP.

6. Remove the 3 screws (1) retaining the mast base.

7. Remove the fastener (2) from the mast base.

8. Remove the right front sill plate. Refer to Door Sill Plate Replacement - Front in Interior Trim.

9. Remove the right kick-up panel. Refer to Kick-Up Panel Replacement - Front Floor in Interior Trim.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Entertainment - Hummer H2

Fig. 33: Antenna Cable & Extension Cable
Courtesy of GENERAL MOTORS CORP.

10. Disconnect the antenna cable (1) from the extension cable (2).

11. Attach a mechanics wire to the antenna cable (1).

12. Remove the antenna cable leaving the mechanics wire in place.

13. Remove the antenna cable assembly from the vehicle.

Installation Procedure

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Entertainment - Hummer H2