Hummer H2. Manual — part 196
1. Connect the electrical connectors to the receptacle.
Fig. 8: Receptacle & Assembly
Courtesy of GENERAL MOTORS CORP.
2. Insert the plastic ring into the opening and snap the plastic ring into place.
3. Insert the receptacle through the plastic ring and gently turn by hand until the receptacle ring is sealed.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Power Outlets - Hummer H2
Fig. 9: Identifying Cigar Lighter
Courtesy of GENERAL MOTORS CORP.
4. Close receptacle covers or insert the cigar lighter.
5. Install the power port/lighter socket fuse.
SPECIAL TOOLS AND EQUIPMENT
SPECIAL TOOLS
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Power Outlets - Hummer H2
Special Tools
Illustration
Tool Number/Description
J 42059
Cigar Lighter Socket Remover
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Power Outlets - Hummer H2
2004 ACCESSORIES & EQUIPMENT
Retained Accessory Power - Hummer H2
SCHEMATIC AND ROUTING DIAGRAMS
RETAINED ACCESSORY POWER (RAP) SCHEMATICS
Fig. 1: Retained Accessory Power (RAP)
Courtesy of GENERAL MOTORS CORP.
DIAGNOSTIC INFORMATION AND PROCEDURES
DIAGNOSTIC STARTING POINT - RETAINED ACCESSORY POWER
Begin the system diagnosis with the Diagnostic System Check - Retained Accessory Power . The diagnostic
system check will provide the following information:
z
The identification of the control modules which command the system
z
The ability of the control modules to communicate through the serial data circuit
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Retained Accessory Power - Hummer H2
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Retained Accessory Power - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст