Hummer H2. Manual — part 403
Fig. 116: I/P Center Console
Courtesy of GENERAL MOTORS CORP.
4. Remove the center console.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 117: I/P Center Console
Courtesy of GENERAL MOTORS CORP.
1. Align center console to center console bracket and route the electrical wiring through console.
2. Connect the console electrical connector.
IMPORTANT: Make sure HVAC duct is aligned with center console.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 118: Center Console Bolts
Courtesy of GENERAL MOTORS CORP.
3. Install the center console to center console bracket.
4. Install the center console bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 119: Console Upper Trim Panel
Courtesy of GENERAL MOTORS CORP.
5. Install the top panel to center console. Refer to Trim Plate Replacement - Console Upper
CENTER CONSOLE END PANEL REPLACEMENT
Removal Procedure
1. Remove screws that hold end panel to center console.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст