Hummer H2. Manual — part 479
Courtesy of GENERAL MOTORS CORP.
1. Starting at the center of the pinch-weld flange, install the weatherstrip (2) to the flange (1) and work up
the top and bottom towards the ends of the weatherstrip, being careful not to stretch the weatherstrip
during installation.
2. Close the door.
WEATHERSTRIP REPLACEMENT - FRONT DOOR
Removal Procedure
1. Open the door.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Fig. 121: Front Door Weatherstrip
Courtesy of GENERAL MOTORS CORP.
2. Using a flat-bladed tool, remove the weatherstrip by releasing the 23 retainers located on the weatherstrip
from the locating holes (1) on the door.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Fig. 122: Front Door Weatherstrip
Courtesy of GENERAL MOTORS CORP.
1. Install weatherstrip by securing the 23 retainers into their correct locating holes (1) on the door.
2. Close the door.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
WEATHERSTRIP REPLACEMENT - FRONT DOOR WINDOW
Removal Procedure
1. Open the door.
2. Lower window to the full down position.
3. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст