Hummer H2. Manual — part 450
Fig. 26: Upper Extension Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Firmly grasp and gently pull to disengage the retaining clips.
2. Inspect for broke or missing retaining clips and replace as necessary.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Fig. 27: Upper Extension Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Align the retaining clips with the openings in the body.
2. Press to fully seat the retaining clips.
TRIM PANEL REPLACEMENT - SIDE FRONT DOOR
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Tools Required
J 38778 Door Trim Pad Clip Remover. See Special Tools and Equipment .
Removal Procedure
Fig. 28: Side Front Door Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Remove the door handle bezel. Refer to Handle Bezel Replacement - Inside - Front
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
2. Remove the door panel retaining screw located in the handle bezel opening.
3. Remove the door window switch. Refer to Switch Replacement - Door Lock and Side Window -
Driver or Switch Replacement - Door Lock and Side Window - Passenger .
4. Use special tool J 38778 to release the door trim panel retaining clips. See Special Tools and
Equipment .
5. Disconnect the electrical wiring harness connectors.
6. Remove the door trim panel from the vehicle.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст