Hummer H2. Manual — part 458
Fig. 54: Rear Door Hinge Fasteners
Courtesy of GENERAL MOTORS CORP.
3. Install the fasteners (1) retaining the hinge to the door.
Tighten: Tighten the fasteners to 25 N.m (18 lb ft).
4. Adjust the door if necessary. Refer to Door Adjustment - Rear .
DOOR CHECK LINK REPLACEMENT
Removal Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
1. Open the door.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door orTrim Panel
Replacement - Side Rear Door .
3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door orWater Deflector
Replacement - Rear Door .
Fig. 55: Rubber Grommet & Front Door Check Link Opening
Courtesy of GENERAL MOTORS CORP.
4. Remove the rubber grommet in the door check link opening (1).
5. Remove the 2 nuts (2) retaining the check link to the door.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Fig. 56: Front Door Check Link Fasteners
Courtesy of GENERAL MOTORS CORP.
6. Remove the 2 fasteners (1) retaining the check link to the vehicle.
7. Remove the check link.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Installation Procedure
1. Place the check link in position in the door.
Fig. 57: Rubber Grommet & Front Door Check Link Opening
Courtesy of GENERAL MOTORS CORP.
2. Install the nuts (2) that retain the check link to the door.
Tighten: Tighten the nuts to 9 N.m (7 lb ft).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст