Hummer H2. Manual — part 2352
Fig. 435: Installing Spacer Plate Support Plate & Bolts
Courtesy of GENERAL MOTORS CORP.
6. Install the spacer plate support plate (53).
7. Install the spacer plate support bolts (77).
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 436: Installing Accumulator Housing Assembly & Bolts
Courtesy of GENERAL MOTORS CORP.
8. Install the 1-2 accumulator housing assembly (57).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
9. Install the 1-2 accumulator housing bolts (58, 59).
Tighten: Tighten the bolts to 11 N.m (8 lb ft).
CONTROL VALVE BODY INSTALLATION
Tools Required
z
J 25025-5 Dial Indicator Mounting Post M6 x 1. See Special Tools and Equipment .00
z
J 36850 Transjel Lubricant
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 437: Installing Checkballs (2-6, 8, 12) In Valve Body & Retaining Checkballs
Courtesy of GENERAL MOTORS CORP.
1. Install the checkballs (2-6, 8, 12) in the valve body and retain checkballs with J 36850 or an equivalent.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст