Toyota Tundra (2019 year). Instruction — part 9

■

To stop the position recall operation part-way through
Perform any of the following:

●

Press the “SET” button.

●

Press button “1” or “2”.

●

Operate any of the seat adjustment switches (only cancels seat position
recall).

●

Operate the tilt and telescopic steering control switch (only cancels steering
wheel position recall).

■

Seat positions that can be memorized (

P. 123)

The adjusted seat positions can be recorded except for lumbar support posi-
tions.

■

Operating the driving position memory after the key is removed from the
engine switch
Recorded seat positions (except the steering wheel position) can be activated
up to 30 seconds after the driver’s door is opened, even if the key is removed
from the engine switch.

■

In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is
operated in the same direction, the recorded position may be slightly different
when it is recalled.

131

Opera

A desired driving position can be recalled linked with the unlocking of
the door.

■

Registering procedure
Record your driving position to button “1” or “2” before performing
the following:

Turn the engine switch off and close the driver’s door.
While pressing the button “1”
or “2”, press

on the wire-

less remote control until the
signal beeps.

The driving position is recalled
when the driver’s door is
unlocked using the wireless
remote control and the driver’s
door is opened.

To prevent unintended triggering of the alarm, open and close a
door once after a driving position has been recorded. (If a door is
not opened within 60 seconds after

is pressed, the doors will

be locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm.
(

P. 85)

■

Cancelation procedure

Turn the engine switch off and close the driver’s door.
While pressing the “SET” button, press

on the wireless

remote control until you hear 2 beeps.

■

If the battery is disconnected
The recorded seat positions are erased when the battery is disconnected.

Memory recall function

WARNING

■

Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.

132

Head restraints

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button.

■

Center seat
Up

Pull the head restraints up.

Down

Push the head restraint down while pressing the lock release button.

Head restraints are provided for all seats.

Front seats

Lock release button

Rear seats



Double Cab models



CrewMax models

Lock release button

133

Opera

■

Outer seat
To use

Lift up the head restraint back to
the neutral position and then push
the head restraint down.

To fold

Lift up the head restraint while
pressing the right lock release but-
ton, and fold it forward.

■

Removing the head restraints



Front seats and center rear seat (CrewMax models)



Center rear seat (Double Cab models)



Outer rear seat

Lock release button

Pull the head restraint up while pressing
the lock release button.

Pull the head restraint up while pressing
both lock release buttons.

Lock release button

134

■

Installing the head restraints



Front seats and center rear seat (CrewMax models)



Center rear seat (Double Cab models)



Outer rear seat

■

Adjusting the height of the head restraints (front seats)

Align the head restraint with the installa-
tion holes and push it down to the lock
position. Press and hold the lock
release button when lowering the head
restraint.

Align the head restraint with the installa-
tion holes and push it down to the lock
position.

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

Lock release button

135

Opera

■

Adjusting the front center seat (bench type seat) and rear center seat
head restraints
Always raise the head restraint one level from the stowed position when
using.

WARNING

■

Head restraint precautions
Observe the following precautions regarding the head restraints.
Failure to do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

136

Steering wheel

Hold the steering wheel and
push the lever down.



Vehicles with front bench type seat

Adjust to the ideal position by
moving the steering wheel.

After adjustment, pull the lever up
to secure the steering wheel.



Vehicles with front separate type seats

Adjust to the ideal position by
moving the steering wheel hori-
zontally and vertically.

After adjustment, pull the lever up
to secure the steering wheel.

Adjustment procedure (manually adjustable type)

137

Opera

Operating the switch moves the steering wheel in the following direc-
tions:

Up
Down
Toward the driver
Away from the driver

To sound the horn, press on or
close to the

mark.

■

After adjusting the steering wheel (manual adjustable type)
Make sure that the steering wheel is securely locked.
The horn may not sound if the steering wheel is not securely locked.
(

P. 136)

Adjustment procedure (power-adjustable type)

Horn

138

When the key is removed from the
engine switch, the steering wheel
returns to its stowed position by
moving up and away to enable
easier driver enter and exit.

Inserting the key into the engine
switch returns the steering wheel
to its original position.

■

The steering wheel can be adjusted when (power adjustable type)
The engine switch is in the “ON” position.

■

Automatic adjustment of the steering position (power adjustable type)
A desired steering position can be entered to memory and recalled automati-
cally by the driving position memory system. (

P. 128)

■

Power easy access system (vehicles with driving position memory)
The steering wheel and driver’s seat move in accordance with engine switch
position and the driver’s seat belt condition. (

P. 128)

Auto tilt away (power-adjustable type)

WARNING

■

Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.

■

After adjusting the steering wheel (manually adjustable type)
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an
accident and resulting in death or serious injury.

139

Opera

Inside rear view mirror

The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.

The rear view mirror’s position can be adjusted to enable suffi-
cient confirmation of the rear view.

Adjusting the height of rear view mirror

140



Manual anti-glare inside rear view mirror

Reflected light from the headlights of vehicles behind can be reduced
by operating the lever.

Normal position
Anti-glare position



Auto anti-glare inside rear view mirror

Responding to the level of brightness of the headlights of vehicles
behind, the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
ON/OFF

When the automatic anti-glare
function is in ON mode, the indica-
tor illuminates.
The function will set to ON mode
each time the engine switch is
turned to the “ON” position.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)

Anti-glare function

141

Opera

■

To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)

■

If a sun visor interferes with the mirror

To ensure that the sensors operate prop-
erly, do not touch or cover them.

Hold and rotate the mirror to adjust the
support.

WARNING

Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident,
resulting in death or serious injury.

142

Outside rear view mirrors



Manually adjustable type

Adjust the mirror up and down, in
or out by pushing the mirror sur-
face.



Power-adjustable type (type A)

To select a mirror to adjust,
press the switch.

Left
Right

To adjust the mirror, press the
switch.

Up
Right
Down
Left

Adjustment procedure

143

Opera



Power-adjustable type (type B)

Upper part mirror:

To select a mirror to adjust,
press the switch.

Left
Right

To adjust the mirror, press the
switch.

Up
Right
Down
Left

Lower part mirror:
Adjust the mirror up and down, in
or out by pushing the mirror sur-
face.



From outside

Push the mirror back in the direc-
tion of the vehicle’s rear.

Folding the mirrors

144