Toyota Highlander (2018 year). Manual — part 105
432
5-11. Using the voice command system
The Mobile Assistant feature will activate Apple’s Siri
®
Eyes Free
mode via the steering wheel switches. To operate the Mobile Assis-
tant, a compatible cellular phone must be registered and connected to
this system via Bluetooth
®
. (
Press and hold the off-hook on
the steering wheel until you
hear the beeps.
The Mobile Assistant can be
used only when the following
screen is displayed.
To cancel the Mobile Assistant,
select “Cancel”, or press and hold
the off-hook on the steering wheel.
To restart the Mobile Assistant for
additional commands, press the
off-hook on the steering wheel.
• Mobile Assistant can only be restarted after the system responds to a
voice command.
• After some phone and music commands, the Mobile Assistant feature will
automatically end to complete the requested action.
■
Adjusting the Mobile Assistant volume
The volume of the Mobile Assistant can be adjusted using the
“PWR·VOL” knob or steering wheel volume switches. The Mobile
Assistant and phone call volumes are synchronized.
Mobile Assistant
1
2
433
5-11. Using the voice command system
5
Audi
o system
■
Notes about Mobile Assistant
●
The available features and functions may vary based on the iOS version
installed on the connected device.
●
Some Siri features are limited in Eyes Free mode. If you attempt to use an
unavailable function, Siri will inform you that the function is not available.
●
If Siri is not enabled on the cellular phone connected via Bluetooth
®
, an
error message will be displayed on the screen.
●
While a phone call is active, the Mobile Assistant cannot be used.
●
If using the navigation feature of the cellular phone, ensure the active audio
source is Bluetooth
®
audio or iPod in order to hear turn by turn direction
prompts.
434
5-11. Using the voice command system
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст