Toyota Highlander (2018 year). Manual — part 160
652
9-1. Specifications
■
Engine number
The engine number is stamped on the engine block as shown.
2.7 L 4-cylinder (1AR-FE)
engine
3.5 L V6 (2GR-FKS) engine
653
9-1. Specifications
9
Vehi
cl
e specificatio
ns
Engine
Model
1AR-FE
2GR-FKS
Type
4-cylinder in line,
4-cycle, gasoline
6-cylinder V type,
4-cycle, gasoline
Bore and stroke
3.54
× 4.13 in.
(90.0
× 105.0 mm)
3.70
× 3.27 in.
(94.0
× 83.0 mm)
Displacement
163.1 cu. in.
(2672 cm
3
)
210.9 cu. in.
(3456 cm
3
)
Valve clearance
Automatic adjustment
Drive belt tension
Fuel
Fuel type
Unleaded gasoline only
Octane rating
87 (Research Octane Number 91) or higher
Fuel tank capacity
(Reference)
19.2 gal. (72.5 L, 15.9 Imp. gal.)
654
9-1. Specifications
*
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice
for good fuel economy and
good starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
Lubrication system
Oil capacity
(Drain and refill
⎯ reference
*
)
With filter
2.7 L 4-cylinder (1AR-FE) engine
4.6 qt. (4.4 L, 3.9 Imp. qt.)
3.5 L V6 (2GR-FKS) engine
5.8 qt. (5.5 L, 4.8 Imp. qt.)
Without filter
2.7 L 4-cylinder (1AR-FE) engine
4.2 qt. (4.0 L, 3.5 Imp. qt.)
3.5 L V6 (2GR-FKS) engine
5.6 qt. (5.3 L, 4.7 Imp. qt.)
Outside temperature
655
9-1. Specifications
9
Vehi
cl
e specificatio
ns
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
How to read oil container label:
The International Lubricant Specification Advisory Committee
(ILSAC) Certification Mark is added to some oil containers to help
you select the oil you should use.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст