Toyota Sequoia (2018 year). Instruction — part 6
81
2
Instrum
SEQUOIA_OM_USA_OM0C011U
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*
1
(U.S.A.)
Brake system warning
light (
*
1
(U.S.A.)
ABS warning light
(
*
1
(Canada)
Brake system warning
light (
*
1
(Canada)
ABS warning light
(
*
1
Charging system warn-
ing light (
*
1
Power steering warning
light (
*
1
(U.S.A.)
Malfunction indicator
lamp (
*
1
Slip indicator (
*
1
(Canada)
Malfunction indicator
lamp (
*
1, 2
PCS warning light
(
*
1
SRS warning light
(
*
3, 4
(Yellow)
LDA indicator (
82
SEQUOIA_OM_USA_OM0C011U
*
1
: These lights turn on when the engine switch is turned to the “ON” position
to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if the lights do not come on, or do not turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: The light flashes to indicate a malfunction.
*
3
: The light illuminates on the multi-information display.
*
4
: The light comes on to indicate a malfunction.
Low fuel level warning
light (
*
1
Tire pressure warning
light (
*
1
Seat belt reminder light
(
*
1
Master warning light
(
83
2
Instrum
SEQUOIA_OM_USA_OM0C011U
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(
*
2
Cruise control indicator
(
(U.S.A.)
Headlight indicator
(
*
2
Cruise control set indica-
tor (
(Canada)
Tail light indicator
(
*
2
(Green)
LDA indicator (
Headlight high beam
indicator (
*
1, 3
Slip indicator (
Automatic High Beam
indicator (
*
1
“TRAC OFF” indicator
(
Front fog light indicator
(
*
1
VSC off indicator
(
(U.S.A.)
Parking brake indicator
(
*
1, 6
PCS warning light
(
(Canada)
Parking brake indicator
(
“BSM” (Blind Spot Moni-
tor) indicator (
Security indicator
(
“RCTA” (Rear Cross
Traffic Alert) indicator
(
*
2
Radar cruise control
indicator (
*
4
BSM (Blind Spot Moni-
tor) outside rear view
mirror indicator
(
84
SEQUOIA_OM_USA_OM0C011U
*
1
: These lights turn on when the engine switch is turned to the “ON” position
to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if the lights do not come on, or do not turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: This light illuminates on the multi-information display.
*
3
: The light flashes to indicate that the system is operating.
*
4
: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the engine switch is turned to the “ON” position, the BSM function
is enabled on the
screen of the multi-information display.
• When the BSM function is enabled on the
screen of the multi-infor-
mation display, the engine switch is turned to the “ON” position.
If the system is functioning correctly, the BSM outside rear view mirror
indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*
5
: This light illuminates on the center panel.
*
6
: This light turns on when the system is off.
(if equipped)
High speed four-wheel
drive indicator (
*
1, 5
“AIR BAG ON/OFF” indi-
cators (
(if equipped)
Low speed four-wheel
drive indicator (
(if equipped)
“TOW/HAUL” indicator
(
(if equipped)
Center differential lock
indicator (
*
2
Low outside tempera-
ture indicator (
*
1
(if equipped)
“AUTO LSD” indicator
(
85
2
Instrum
SEQUOIA_OM_USA_OM0C011U
WARNING
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by your Toyota dealer immedi-
ately if this occurs.
86
SEQUOIA_OM_USA_OM0C011U
Gauges and meters
Tachometer
Displays the engine speed in revolutions per minute
Engine oil pressure gauge
Displays the engine oil pressure
Outside temperature display
Displays the outside temperature within the range of -40 °F (-40 °C) to
122 °F (50 °C). Low outside temperature indicator comes on when the
ambient temperature is 37 ° F (3 °C) or lower.
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages in case of a malfunction (
Voltmeter
Displays the charge state
Speedometer
Displays the vehicle speed
Odometer/Trip meter switching and trip meter resetting button
Fuel gauge
Displays the quantity of fuel remaining in the tank
The displayed content may differ depending on the type of
meter.
87
2
Instrum
SEQUOIA_OM_USA_OM0C011U
Odometer and trip meter display
Shift position and shift range display
Displays the selected shift position or selected shift range (
Engine coolant temperature gauge
Displays the engine coolant temperature
Instrument panel light control button (
Pressing the button changes the
display change button display as
follows.
■
Odometer
Displays the total distance the vehicle has been driven.
■
Trip meter A
*
/trip meter B
*
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
*
: Press and hold the display change button to reset.
Changing the odometer/trip meter display
88
SEQUOIA_OM_USA_OM0C011U
The brightness of the instrument panel lights can be adjusted.
Pressing the button will adjust
brightness of the instrument panel
light.
Short press: 1 step change of
brightness level.
Long press: continues change of
brightness level until released.
■
The meters and display illuminate when
The engine switch is in the “ON” position.
■
Instrument panel brightness adjustment
When the tail lights are turned on, the display’s brightness will be reduced
slightly unless the meter brightness level adjustment is set to the brightest
setting.
■
Outside temperature display
●
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system may be malfunctioning. Take your
vehicle to your Toyota dealer.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
Instrument panel light control
89
2
Instrum
SEQUOIA_OM_USA_OM0C011U
WARNING
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in personal death or injury.
NOTICE
■
To prevent damage to the engine and its components
●
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
■
Voltmeter
When the voltmeter indicates 19 V or higher or 9 V or lower while the engine
is running, there may be a battery or charging system malfunction. Have the
vehicle inspected at your Toyota dealer.
■
Engine oil pressure gauge
When the value of the engine oil pressure gauge drops while the engine is
running, stop the vehicle in a safe place immediately and check the amount
of engine oil. (
When the oil pressure drops even though the engine oil amount has not
decreased, or if the oil pressure does not increase when engine oil is
added, contact your Toyota dealer, as there may be a problem with the lubri-
cation system.
90
SEQUOIA_OM_USA_OM0C011U
Multi-information display
The multi-information display presents the driver with a variety of vehi-
cle data.
● Menu icons
Displays the following informa-
tion when an icon is selected.
Some of the information may be
displayed automatically
depending on the situation.
Drive information
Select to display various drive data. (
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Vehicle information
• LDA (Lane Departure Alert) (
• Dynamic radar cruise control (
• Display the operational status of the tire inflation pressure.
(
Warning message display
Select to display warning messages and measures to be taken if a
malfunction is detected. (
Settings display
Select to change the meter display settings and the operation set-
tings of some vehicle functions. (
Display contents
91
2
Instrum
SEQUOIA_OM_USA_OM0C011U
■
Operating the meter control switches
Select an item/change pages
Press: Enters/Sets
Press and hold: Resets
Switch menu/Displays the
top screen
Returns to the previous
screen
● Average fuel economy (Total Average
*
/Tank Average/Trip Average)
Displays the average fuel consumption since the function was
reset, the vehicle was refueled, or the engine was started, respec-
tively
Use the displayed average fuel consumption as a reference.
● Distance (driving range/after start)
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining or the distance driven after the engine
was started respectively.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
● Current fuel consumption
Displays the current rate of fuel consumption
Drive information
92
SEQUOIA_OM_USA_OM0C011U
● Average speed (Average Speed
*
/Trip Average Speed)
Displays the average since engine was started or the average since
the function was reset, respectively
● Elapsed Time (Total Time
*
/Trip Time)
Displays the engine was started or the elapsed time since the func-
tion was reset, respectively
● Digital speedometer
● Display off
A blank screen is displayed
*
: Resetting procedures:
• Select a function to be reset using the meter control switch and then
press and hold the center button to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to the functions.
The settings of the following items can be changed, refer to P. 520.
For functions that can be enabled or disabled, the function switches
between on and off each time is
pressed.
● LDA (Lane Departure Alert) (→P. 523)
• LDA Sensitivity
Select to set up the LDA (Lane Departure Alert) sensitivity.
• Sway warning
Select to enable/disable the sway warning function.
• Sway warning sensitivity
Select to set up the sway warning sensitivity.
● PCS (Pre-Collision System) (→P. 523)
• PCS
Select to enable/disable the PCS (Pre-Collision System) function.
• Sensitivity
Select to set up the PCS (Pre-Collision System) sensitivity.
● BSM (Blind Spot Monitor) (→P. 524)
Select to enable/disable the Blind Spot Monitor function.
● RCTA (Rear Cross Traffic Alert) (→P. 524)
Select to enable/disable the Rear Cross Traffic Alert function.
Settings display
93
2
Instrum
SEQUOIA_OM_USA_OM0C011U
● Vehicle Settings
• Brightness (
→P. 524)
Select to set up the BSM (Blind Spot Monitor) outside rear view mirror
indicators brightness.
• RCTA volume (
Select to set up the RCTA (Rear Cross Traffic Alert) sensitivity.
• Maintenance system (U.S.A. only)
Select to reset the message after the required maintenance is per-
formed. (
● Meter settings
• Language
Select to change the language on the display.
• Units
Select to change the unit of measure for fuel consumption and tempera-
ture.
•
Switch settings
You can register 1 screen as the top screen. To register, press and hold
while the desired screen is displayed.
• Drive information 1 and 2
Select to select up to 2 items that will be displayed on a Drive informa-
tion screen, up to 2 Drive information screens can be set.
• Pop-up display
Select to set the following pop-up displays, which may appear in some
situations, on/off.
• Instrument panel brightness adjustment display
• Route guidance display of the navigation system-linked system (if
equipped)
• Incoming call display of the hands-free phone system
• Accent color
Select to change the accent colors on the screen, such as the cursor
color.
• Default settings
Registered or changed meter settings will be deleted or returned to their
default setting.
94
SEQUOIA_OM_USA_OM0C011U
■
Setting items
●
“Vehicle Settings” and “Meter Settings” setting items are not selectable
during driving and cannot be operated.
Also, the settings screen is temporarily canceled in the following situations.
• A warning message is displayed.
• The vehicle starts off.
●
Settings for functions not equipped to the vehicle are not displayed.
●
When a function is turned off, the related settings for that function are not
selectable.
■
Pop-up display
In some situations, such as when a switch operation is performed, a pop-up
display will be temporarily displayed on the multi-information display.
■
When disconnecting and reconnecting battery terminals
The drive information will be reset.
■
Trip Summary display
When the engine switch is turned off, each of the following will be displayed
on the multi-information display, and will extinguish after approximately 30
seconds.
●
Distance traveled
●
Average fuel economy
●
Driving range
■
Tire inflation pressure
●
It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to the “ON” position. It may also take a few minutes
to display the tire inflation pressure after inflation pressure has been
adjusted.
●
“---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
95
2
Instrum
SEQUOIA_OM_USA_OM0C011U
WARNING
■
Caution for use while driving
●
When operating the multi-information display while driving, pay extra
attention to the safety of the area around the vehicle.
●
Do not look continuously at the multi-information display while driving as
you may fail to see pedestrians, objects on the road, etc. ahead of the
vehicle.
■
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■
During setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
96
SEQUOIA_OM_USA_OM0C011U
Fuel consumption information
Press the “APPS” button, and then select “Eco” on the screen.
■
Trip information
If the “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption
data
Average vehicle speed since
the engine was started
Elapsed time since the
engine was started
Fuel consumption in the past
15 minutes
Cruising range (
Current fuel consumption
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the engine
switch was last turned to the “ON” position. Use the displayed aver-
age fuel consumption as a reference.
These images are examples only.
The fuel consumption information can be displayed on the navi-
gation system or multimedia system screen.
Display the trip information or past record screen
Fuel consumption
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст