Toyota RAV4 (2022 year). Manual in english — page 24
385
5-2. Basic information before operation
5
Audio
“Display (General)” screen
only: Select “<” or “>” to select
the desired display.
• “Contrast”
“+”: Select to strengthen the con-
trast of the screen.
“-”: Select to weaken the contrast of
the screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Linking multi-informa-
tion display and the
system
The following functions of
the system are linked with
the multi-information dis-
play in the instrument clus-
ter:
Audio
Phone
*
etc.
These functions can be
operated using meter con-
trol switches on the steering
wheel. (
*
: When an Apple CarPlay con-
nection is established, this
function will be unavailable.
386
5-3. Connectivity settings
5-3.Connectivity settings
■
Registering from the sys-
tem
1
Turn the Bluetooth
®
connec-
tion setting of your cellular
phone on.
This function is not available
when Bluetooth
®
connection
setting of your cellular phone
is set to off.
2
Press the “MENU” button.
3
Select “Phone”.
Operations up to this point
can also be performed by
pressing the “PHONE” button
on the instrument panel.
4
Select “Yes” to register a
phone.
Registering/Connect-
ing a Bluetooth
®
device
To use the hands-free sys-
tem, it is necessary to regis-
ter a Bluetooth
®
phone with
the system.
Once the phone has been
registered, it is possible to
use the hands-free system.
This operation cannot be
performed while driving.
When an Apple CarPlay
connection is established,
Bluetooth
®
functions of the
system will become unavail-
able and any connected
Bluetooth
®
devices will be
disconnected.
When connecting to
Android Auto, a Bluetooth
®
connection will be made
automatically.
When an Android Auto con-
nection is established,
some Bluetooth
®
functions
other than hands-free sys-
tem cannot be used.
Registering a Bluetooth
®
phone for the first time
387
5-3. Connectivity settings
5
Audio
5
Select the desired Bluetooth
®
device.
If the desired Bluetooth
®
phone is not on the list, select
“If you cannot find...” and fol-
low the guidance on the
screen. (
6
Register the Bluetooth
®
device using your Bluetooth
®
device.
For details about operating
the Bluetooth
®
device, see
the manual that comes with it.
A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device
being connected, a message
confirming registration may
be displayed on the
Bluetooth
®
device’s screen.
Respond and operate the
Bluetooth
®
device according
to the confirmation message.
7
Check that the following
screen is displayed, indicat-
ing pairing was successful (a
Bluetooth
®
link has been
established but registration is
not yet complete).
The system is connecting to
the registered device.
At this stage, the Bluetooth
®
functions are not yet avail-
able.
8
Check that “Connected” is
displayed and registration is
complete.
If an error message is dis-
played, follow the guidance
on the screen to try again.
●
If a cellular phone does not oper-
ate properly after being con-
388
5-3. Connectivity settings
nected, turn the cellular phone off
and on and then connect it again.
■
Registering from phone
1
Select “If you cannot find...”.
2
Select “Register from
Phone”.
3
Check that the following
screen is displayed, and reg-
ister the Bluetooth
®
device
using your Bluetooth
®
device.
For details about operating
the Bluetooth
®
device, see
the manual that comes with it.
A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device
being connected, a message
confirming registration may
be displayed on the
Bluetooth
®
device’s screen.
Respond and operate the
Bluetooth
®
device according
to the confirmation message.
4
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
7
.
(
To use the Bluetooth
®
audio, it
is necessary to register an audio
player with the system.
Once the player has been regis-
tered, it is possible to use the
Bluetooth
®
audio.
This operation cannot be per-
formed while driving.
For details about registering a
Bluetooth
®
device:
1
Turn the Bluetooth
®
connec-
tion setting of your audio
player on.
This function is not available
when the Bluetooth
®
connec-
tion setting of your audio
Registering a Bluetooth
®
audio player for the first
time
389
5-3. Connectivity settings
5
Audio
player is set to off.
2
Press the “AUDIO” button.
3
Select “Source” on the audio
screen or press “AUDIO” but-
ton again.
4
Select “Bluetooth”.
5
Select “Yes” to register an
audio player.
6
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
5
.
(
This system supports the follow-
ing services.
■
Bluetooth
®
Core Specifica-
tion
Ver. 2.0 or higher (Recom-
mended: Ver. 4.2 or higher)
■
Profiles
HFP (Hands Free Profile) Ver.
1.0 (Recommended: Ver. 1.7)
• This is a profile to allow hands-
free phone calls using a cellular
phone. It has outgoing and
incoming call functions.
OPP (Object Push Profile)
Ver. 1.1 (Recommended: Ver.
1.2)
• This is a profile to transfer con-
tacts data.
PBAP (Phone Book Access
Profile) Ver. 1.0 (Recom-
mended: Ver. 1.2)
• This is a profile to transfer phone-
book data.
MAP (Message Access Pro-
file) Ver. 1.0 (Recommended:
Ver. 1.2)
• This is a profile to use phone
message functions.
SPP (Serial Port Profile) Rec-
ommended: Ver. 1.2
• This is a profile to use the Toyota
audio multimedia function.
A2DP (Advanced Audio Dis-
tribution Profile) Ver. 1.0
(Recommended: Ver. 1.3)
• This is a profile to transmit stereo
audio or high quality sound to the
audio/visual system.
AVRCP (Audio/Video Remote
Control Profile) Ver. 1.0 (Rec-
ommended: Ver. 1.6)
• This is a profile to allow remote
control the A/V equipment.
●
This system is not guaranteed to
operate with all Bluetooth
®
devices.
●
If your cellular phone does not
support HFP, registering the
Bluetooth
®
phone or using OPP,
PBAP, MAP or SPP profiles indi-
vidually will not be possible.
Profiles
390
5-3. Connectivity settings
●
If the connected Bluetooth
®
device version is older than rec-
ommended or incompatible, the
Bluetooth
®
device function may
not work properly.
●
Refer to http://www.toyota.com/
audio-multimedia in the United
States,
http://www.toyota.ca/connected in
Canada, and
https://www.toyotapr.com/servicio
sconectados in Puerto Rico, to
find approved Bluetooth
®
phones
for this system.
●
Certification
Bluetooth is a registered trademark
of Bluetooth SIG, Inc.
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Bluetooth”.
Setting Bluetooth
®
details
When an Apple CarPlay
connection is established,
this function will be unavail-
able.
*
When an Android Auto con-
nection is established,
some functions will be
unavailable.
*
*
: This function is not made avail-
able in some countries or
areas.
Displaying the Bluetooth
®
setup screen
391
5-3. Connectivity settings
5
Audio
4
Select the desired item to be
set.
Connecting a Bluetooth
®
device and editing the
Bluetooth
®
device informa-
tion (
Registering a Bluetooth
®
device (
Deleting a Bluetooth
®
device
(
Setting the Bluetooth
®
sys-
tem (
●
When an Apple CarPlay connec-
tion is established, this function
will be unavailable.
●
When an Android Auto connection
is established, some functions will
be unavailable.
Up to 5 Bluetooth
®
devices
(Phones (HFP) and audio play-
ers (AVP)) can be registered.
If more than 1 Bluetooth
®
device
has been registered, select
which device to connect to.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Registered Device”.
3
Select the device to be con-
nected.
“Add”: Registering a Bluetooth
®
device. (
“Preferred Device Settings”: Select
to change the automatic connection
priority of the registered Bluetooth
®
devices. (
“Remove”: Deleting a Bluetooth
®
device. (
: Phone
: Audio player
: Phone/Toyota Apps Services
The profile icon for a currently
connected device will be dis-
played in color.
Selecting a profile icon which
Bluetooth
®
setup screen
A
B
C
D
Connecting a Bluetooth
®
device
392
5-3. Connectivity settings
is not currently connected will
switch the connection to the
function.
If the desired Bluetooth
®
device is not on the list, select
“Add New Device” to register
the device. (
4
Select the desired connec-
tion.
“Device Info”: Select to con-
firm and change the
Bluetooth
®
device informa-
tion. (
When another Bluetooth
®
device is connected
To disconnect the Bluetooth
®
device, select “Yes”.
5
Check that a confirmation
screen is displayed when the
connection is complete.
If an error message is dis-
played, follow the guidance
on the screen to try again.
●
It may take time if the device con-
nection is carried out during
Bluetooth
®
audio playback.
●
Depending on the type of
Bluetooth
®
device being con-
nected, it may be necessary to
perform additional steps on the
device.
●
When disconnecting a Bluetooth
®
device, it is recommended to dis-
connect using the system.
■
Connecting a Bluetooth
®
device in a different way
(from phone top screen)
■
Connecting a Bluetooth
®
device in a different way
(from phone setup screen)
■
Connecting a Bluetooth
®
device in a different way
(from Bluetooth
®
audio
screen)
■
Auto connection mode
To turn auto connection mode
on, set “Bluetooth Power” to on.
(
P.395) Leave the Bluetooth
®
device in a location where the
connection can be established.
When the engine switch is in
ACC or ON, the system
searches for a nearby regis-
tered device.
The system will connect with
the registered device that was
last connected, if it is nearby.
When automatic connection
priority is set to on and there
is more than one registered
Bluetooth
®
phone available,
the system will automatically
connect to the Bluetooth
®
393
5-3. Connectivity settings
5
Audio
phone with the highest prior-
ity. (
■
Connecting manually
When the auto connection has
failed or “Bluetooth Power” is
turned off, it is necessary to con-
nect the Bluetooth
®
device man-
ually.
1
Display the Bluetooth
®
set-
tings screen. (
2
Follow the steps in “Connect-
ing a Bluetooth
®
device” from
step
2
. (
■
Reconnecting the
Bluetooth
®
phone
If a Bluetooth
®
phone is discon-
nected due to poor reception
from the Bluetooth
®
network
when the engine switch is in
ACC or ON, the system auto-
matically reconnects the
Bluetooth
®
phone.
Up to 5 Bluetooth
®
devices can
be registered.
Bluetooth
®
compatible phones
(HFP) and audio players (AVP)
can be registered simultane-
ously.
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Add New Device”.
When another Bluetooth
®
device is connected
To disconnect the Bluetooth
®
device, select “Yes”.
When 5 Bluetooth
®
devices
have already been registered
A registered device needs to
be replaced. Select “Yes”,
and select the device to be
replaced.
3
Follow the steps in “Register-
ing a Bluetooth
®
phone for
the first time” from step
5
.
(
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Remove Device”.
3
Select the desired device.
Registering a Bluetooth
®
device
Deleting a Bluetooth
®
device
394
5-3. Connectivity settings
4
Select “Yes” when the confir-
mation screen appears.
5
Check that a confirmation
screen is displayed when the
operation is complete.
●
When deleting a Bluetooth
®
phone, the contact data will be
deleted at the same time.
The Bluetooth
®
device’s infor-
mation can be displayed on the
screen. The displayed informa-
tion can be edited.
This operation cannot be per-
formed while driving.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Registered Device”.
3
Select the desired device to
be edited.
4
Select “Device Info”.
5
Confirm and change the
Bluetooth
®
device informa-
tion.
The name of the Bluetooth
®
device is displayed. It can be
changed to a desired name.
(
Select to set the Bluetooth
®
audio player connection
method. (
Device address is unique to
the device and cannot be
changed.
Phone number is unique to
the Bluetooth
®
phone and
cannot be changed.
Compatibility profile is unique
to the Bluetooth
®
device and
cannot be changed.
Select to reset all setup
items.
Editing the Bluetooth
®
device information
A
B
C
D
E
F
395
5-3. Connectivity settings
5
Audio
●
If 2 Bluetooth
®
devices have been
registered with the same device
name, the devices can be distin-
guished referring to the device’s
address.
●
Depending on the type of
Bluetooth
®
phone, some informa-
tion may not be displayed.
1
Select “Device Name”.
2
Enter the name and select
“OK”.
●
Even if the device name is
changed, the name registered in
your Bluetooth
®
device does not
change.
1
Select “Connect Audio Player
From”.
2
Select the desired connec-
tion method.
“Vehicle”: Select to connect the
audio player from the vehicle’s
audio/visual system.
“Device”: Select to connect the
vehicle’s audio/visual system from
the audio player.
Depending on the audio
player, the “Vehicle” or
“Device” connection method
may be best. As such, refer to
the manual that comes with
the audio player.
The Bluetooth
®
settings can be
confirmed and changed.
1
Display the Bluetooth
®
set-
tings screen. (
2
Select “Detailed Settings”.
3
Select the desired item to be
set.
Select to set Bluetooth
®
con-
nection on/off. (
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
devices. (
Select to edit the system
information. (
Select to reset all setup
items.
Changing a device name
Setting audio player con-
nection method
“Detailed Settings”
screen
A
B
C
D
396
5-3. Connectivity settings
1
Select “Bluetooth Power”.
When “Bluetooth Power” is on:
The Bluetooth
®
device is auto-
matically connected when the
engine switch is in ACC or ON.
When “Bluetooth Power” is off:
The Bluetooth
®
device is dis-
connected, and the system will
not connect to it next time.
●
While driving, the auto connection
state can be changed from off to
on, but cannot be changed from
on to off.
The automatic connection prior-
ity of the registered Bluetooth
®
devices can be changed.
1
Select “Preferred Device Set-
tings”.
2
Select the desired item to be
set.
Select to set automatic con-
nection priority on/off.
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
phones. (
Select to change the auto-
matic connection priority of
the registered Bluetooth
®
audio players. (
Select to reset all setup
items.
■
Changing Bluetooth
®
device automatic connec-
tion priority
1
Select “Preferred Phones” or
“Preferred Audio Players”.
2
Select the desired Bluetooth
®
device and select “Move Up”
or “Move Down” to change
the preferred order.
●
A newly registered Bluetooth
®
device will automatically be given
the highest automatic connection
priority.
1
Select “System Information”.
Changing “Bluetooth
Power”
Setting automatic connec-
tion priority
A
B
Editing the system infor-
mation
C
D
397
5-3. Connectivity settings
5
Audio
2
Select the desired item to be
set.
Displays system name. Can
be changed to a desired
name. (
PIN code used when the
Bluetooth
®
device was regis-
tered. Can be changed to a
desired code. (
Device address is unique to
the device and cannot be
changed.
Select to set the connection
status display of the phone
on/off.
Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system
Select to reset all setup
items.
■
Editing the system name
1
Select “System Name”.
2
Enter a name and select
“OK”.
■
Editing the PIN code
1
Select “System PIN Code”.
2
Enter a PIN code and select
“OK”.
A
B
C
D
E
F
G
398
5-3. Connectivity settings
*
: Vehicles equipped with DCM
only. This function is not made
available in some countries or
areas.
1
Enable the Wi-Fi
®
Hotspot
function. (
2
Disable the “Hide Access
Point” function. (
3
Search for the vehicle access
point using the device you
wish to connect.
For details about operating
the device, refer to the docu-
mentation which came with it.
4
Operate the device to con-
nect it to the vehicle access
point.
To check the vehicle access
point password, check “Pass-
word”. (
●
Hints for connecting to the vehicle
via Wi-Fi
®
can be displayed.
(
1
Enable the Wi-Fi
®
Hotspot
function. (
2
Enable the “Hide Access
Point” function. (
3
Enter the access point name
(SSID) into the device you
wish to connect and connect
it.
To check the vehicle access
point password, check “Pass-
word”. (
The security settings on the
device must be the same as
that displayed for “Security”.
(
For details about operating
the device, refer to the docu-
mentation which came with it.
Wi-Fi
®
Hotspot
*
By connecting a device to
the vehicle via Wi-Fi
®
, it can
access the internet through
the DCM.
To use this function, a
Wi-Fi
®
Hotspot service sub-
scription from AT&T is
required. Connect your
device to the in-vehicle
access point (see instruc-
tions below), or contact your
Toyota dealer for details.
Connecting a device to
the in-vehicle access
point
Searching for and con-
necting a device to the
vehicle access point
Connecting a device to the
in-vehicle access point
using the access point
name (SSID)
399
5-3. Connectivity settings
5
Audio
1
Press the “MENU” button.
2
Select “Setup”.
3
Select “Wi-Fi
*
”.
*
: Wi-Fi
®
is a registered trademark
of Wi-Fi Alliance
®
.
4
Select the desired item to be
set.
Select to enable/disable the
Wi-Fi
®
Hotspot function.
(
Select to check/change the
access point password.
(
Select to display hints for
connecting to the vehicle via
Wi-Fi
®
.
Select to make the access
point searchable/unsearch-
able.
Select to check/change the
security protocol of the
access point (for authentica-
tion and encryption).
(
Select to change the access
point name (SSID). (
Select to change the Wi-Fi
®
connection channel (within
the 2.4GHz frequency band).
(
●
If any settings have been
changed, it will be necessary to
reset the Wi-Fi
®
system to com-
plete the changes. To reset the
Wi-Fi
®
system, select “Yes” on the
pop-up displayed after changing
the settings.
When the Wi-Fi
®
Hotspot func-
tion is enabled, the system
checks for a valid Hotspot ser-
vice subscription.
If a Hotspot service subscription
has not been started, connect
your device to the in-vehicle
Changing the Wi-Fi
®
set-
tings
A
Enabling/disabling the
Wi-Fi
®
Hotspot function
B
C
D
E
F
G
400
5-3. Connectivity settings
access point to start your sub-
scription. A trial subscription
may be available.
Contact your Toyota dealer for
details about the Toyota Apps.
1
Select “Password”.
2
Check that the following
screen is displayed.
Displays the password
Select to display/hide the
entered password.
Select to change the pass-
word.
1
Select “Change Password”.
2
Enter the desired password
and select “OK”.
When setting/changing a
password, observe the follow-
ing guidelines to help prevent
the password from being
cracked by a third party:
• Use an 8-character or longer
password consisting of letters
and numbers. (Non-ASCII char-
acters will not be recognized by
the system.)
• Change the password regularly.
• If you write the password down,
do not leave it somewhere where
it would be visible.
• Do not use the same password
for vehicle Wi-Fi
®
Hotspot as
other accounts already protected
by a password.
• Avoid using easy to identify
words, such as your vehicle’s
model name or license plate
number, simple dictionary words,
or words with simple obfuscation,
such as c@t (for cat), as your
password.
1
Select “Security”.
2
Select the desired security
protocol.
1
Select “Access Point Name”.
2
Enter the desired access
point name (SSID) and select
“OK”.
1
Select “Channel”.
Checking/changing the
password
Changing the password
A
B
C
Changing the security pro-
tocol
Changing the access point
name (SSID)
Selecting a Wi-Fi
®
connec-
tion channel
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст