Toyota Sienna (2019 year). Instruction — part 6
81
SIENNA_OM_OM08025U_(U)
1
?
Alarm-operated door lock
In the following cases, depending on the situations, the door may automati-
cally lock to prevent improper entry into the vehicle:
?
When a person left in the vehicle triggers the alarm by unlocking a door or
the back door.
?
When a person left in the vehicle unlocks a door or the back door while the
alarm is operating.
?
When recharging or replacing the battery.
NOTICE
?
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
83
SIENNA_OM_OM08025U_(U)
Instrument cluster
2
2.
Instrument cluster
Warning lights and
indicators . . . . . . .. 84
Gauges and meters . . . 89
Multi-information display . . 92
Fuel consumption
information . . . . . . 99
84
SIENNA_OM_OM08025U_(U)
Warning lights and indicators
The units used on the meters and some indicators may differ depending on
the target region.
The warning lights and indicators on the instrument cluster and
center panel inform the driver of the status of the vehicle’s vari-
ous systems.
For the purpose of explanation, the following illustration dis-
plays the instrument cluster with all warning lights and indica-
tors illuminated.
SIENNA_OM_OM08025U_(U)
85
2
Instru
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*
1
(U.S.A.)
Brake system warning
light (
*
1, 2
PCS warning light
(
*
1
(Canada)
Brake system warning
light (
*
3
(Amber)
LDA indicator (
*
3
Charging system
warning light (
*
1
Slip indicator (
*
3
Low engine oil pressure
warning light (
Low fuel level warning
light (
*
1
(U.S.A.)
Malfunction indicator
lamp (
Seat belt reminder light
(
*
1
(Canada)
Malfunction indicator
lamp (
*
3
Low engine oil level
warning light (
*
1
SRS warning light
(
*
1
Master warning light
(
*
1
(U.S.A.)
ABS warning light
(
*
1
Tire pressure warning
light (
*
1
(Canada)
ABS warning light
(
*
3
Low windshield
washer fluid level
warning light (P. 474)
*
1
Electric power steering
system warning light
(
*
4
Third seat warning light
(
86
SIENNA_OM_OM08025U_(U)
*
1
: These lights turn on when the engine switch is turned to the “ON” position
(vehicles without a smart key system) or IGNITION ON mode (vehicles
with a smart key system) to indicate that a system check is being per-
formed. They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*
2
: The light comes on or flashes to indicate a malfunction.
*
3
: This light illuminates on the multi-information display.
*
4
: If equipped
The indicators inform the driver of the operating state of the vehicle’s
various systems.
*
3
Brake Override System
warning light (
*
3
High coolant
temperature warning
light (
Indicators
Turn signal indicator
(
*
2
Cruise control indicator
(
(U.S.A.)
Headlight indicator
(
*
2
Dynamic radar cruise
control indicator
(
(Canada)
Tail light indicator
(
*
2
Cruise control “SET”
indicator (
P. 289)
Headlight high beam
indicator (
*
2
(White)
LDA indicator (
Automatic High Beam
indicator (
*
2
(Green)
LDA indicator (
*
1
Fog light indicator
(
*
2, 4
(Amber)
LDA indicator (
SIENNA_OM_OM08025U_(U)
87
2
Instru
*
1
: If equipped
*
2
: This light illuminates on the multi-information display.
*
3
: These lights turn on when the engine switch is turned to the “ON” position
(vehicles without a smart key system) or IGNITION ON mode (vehicles
with a smart key system) to indicate that a system check is being per-
formed. They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*
4
: The light flashes to indicate that the system is operating.
*
5
: The light comes on when the system is turned off.
*
3, 4
Slip indicator (
*
3, 8
Eco Driving Indicator
Light (
*
3, 5
VSC OFF indicator
(
*
2
Low outside
temperature indicator
(
*
3, 5
PCS warning light
(
*
3, 9
(U.S.A.)
“AIR BAG ON/OFF”
indicator (
*
1, 6, 7
BSM (Blind Spot
Monitor) outside rear
view mirror indicators
(
*
1, 2
“BSM” (Blind Spot
Monitor) indicator
(
*
3, 9
(Canada)
“AIR BAG ON/OFF”
indicator (
*
1, 2
“RCTA” (Rear Cross
Traffic Alert) indicator
(
Security indicator
(
*
2
“ECT PWR” indicator
(
88
SIENNA_OM_OM08025U_(U)
*
6
: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the engine switch is turned to the “ON” position (vehicles without a
smart key system) or IGNITION ON mode (vehicles with a smart key sys-
tem) while the BSM function is turned on.
• When the BSM function is turned on while the engine switch is in the
“ON” position (vehicles without a smart key system) or IGNITION ON
mode (vehicles with a smart key system).
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*
7
: This light illuminates on the outside rear view mirrors.
*
8
: The light does not turn on when the system is disabled.
*
9
: This light illuminates on the center panel.
?
Eco Driving Indicator Light
?
The vehicle is set to power mode. (
?
The vehicle speed is approximately 80 mph (130 km/h) or higher.
During Eco-friendly acceleration (Eco
driving), Eco Driving Indicator Light will
turn on. When the acceleration pedal is
depressed excessively, or when the vehi-
cle is stopped, the light turns off.
Eco Driving Indicator Light will not operate
in the following conditions:
?
The shift lever is in anything other than
D.
WARNING
?
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning lights not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by your Toyota dealer immedi-
ately if this occurs.
89
SIENNA_OM_OM08025U_(U)
2
Instru
Gauges and meters
The displayed content may differ depending on the type of
meter.
90
SIENNA_OM_OM08025U_(U)
Tachometer
Displays the engine speed in revolutions per minute
Multi-information display
Presents the driver with a variety of driving-related data (
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Odometer/trip meter display change button
Outside temperature
Odometer and trip meter display
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Shift position and range
Meter panel lights control button
Engine coolant temperature gauge
Displays the engine coolant temperature
Pressing this button switches
among the odometer, trip meter
“A” and trip meter “B” displays.
When the trip meter is displayed,
pressing and holding the button
will reset the trip meter.
Changing the trip meter display
1
2
3
4
5
6
7
8
9
10
SIENNA_OM_OM08025U_(U)
91
2
Instru
The brightness of the meter panel lights can be adjusted.
Pressing the button will adjust the
brightness of the meter panel
lights.
The brightness level of the meters
when the surroundings are bright
(day mode) and dark (night mode)
can be adjusted individually. How-
ever, when in day mode, adjusting
the brightness level will also
change the brightness level of
night mode.
?
Outside temperature display
?
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
?
The temperature range that can be displayed is from -40°F (-40°C) to 122°F
(50°C).
When the outside temperature drops below 37°F (3°C), the Low outside
temperature indicator will be displayed on the multi-information display.
(
?
When “--” or “E” is displayed, the system may be malfunctioning. Take your
vehicle to your Toyota dealer.
Meter panel light control
NOTICE
?
To prevent damage to the engine and its components
?
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
?
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
92
SIENNA_OM_OM08025U_(U)
Multi-information display
The
multi-information
display
presents the driver with a variety
of vehicle data.
?
Menu icons
Displays the following information when an icon is selected.
(
Some of the information may be displayed automatically depending
on the situation.
Drive information
Select to display various drive data. (
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio/visual system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Dynamic radar cruise control display
Select to display the information and operation procedures of the
dynamic radar cruise control. (
The
tab will change to
when the vehicle is in constant
speed control mode. (
Display contents
SIENNA_OM_OM08025U_(U)
93
2
Instru
Warning message display
Select to display warning messages and measures to be taken if a
malfunction is detected. (
When there is a warning message that can be displayed, the color of
changes to Amber.
Settings display
Select to change the meter display settings. (
?
Intuitive parking assist display (if equipped)
Automatically displayed when the system is used (
P. 315)
?
Power mode (
The multi-information display is
operated using the meter control
switches.
Enter/Set
Select an item/Change pages
Return to the previous screen
Press: Displays the screen reg-
istered as the top screen
When no screen has been registered, the drive information screen will be
displayed.
Press and hold: Registers the currently displayed screen as the top
screen
When the confirmation screen is displayed, select yes to register the
screen. If the selected screen cannot be registered, a registration failure
message will be shown.
Operating the meter control switches
1
2
3
4
94
SIENNA_OM_OM08025U_(U)
?
Average fuel economy
*
1, 2
Displays the average fuel consumption since the function was
reset.
*
3
?
Tank average fuel economy
*
1, 2
Displays the average fuel consumption since the vehicle was refu-
eled.
?
Trip average fuel economy
*
1, 2
Displays the average fuel consumption since the engine was
started.
?
Current fuel economy
*
1, 2
Displays the current rate of fuel consumption.
?
Distance to empty
*
1
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consump-
tion. As a result, the actual distance that can be driven may differ
from that displayed.
• When only a small amount of fuel is added to the tank, the dis-
play may not be updated.
When refueling, turn the engine switch off. If the vehicle is refu-
eled without turning the engine switch off, the display may not be
updated.
?
Trip distance
*
1
Displays the driving distance after the engine was started.
?
Distance
*
1
Displays the driving distance since the function was reset.
*
3
?
Trip elapsed time
*
1
Displays the elapsed time since the function was reset.
*
3
?
Elapsed time
*
1
Displays the elapsed time since the engine was started.
?
Trip average speed
*
1
Displays the average vehicle speed since the function was reset.
*
3
?
Average speed
*
1
Displays the average vehicle speed since the engine was started.
Drive information
SIENNA_OM_OM08025U_(U)
95
2
Instru
?
AWD control (if equipped)
Displays the torque distribution between the front and rear axles of
the AWD control system
?
Digital speedometer
*
1
?
Display off
A blank screen is displayed.
*
1
: Can be registered to Drive information 1 through 3. (
*
2
: Use the displayed fuel consumption as a reference.
*
3
: Resetting procedures:
• Select a function to be reset using the meter control switches and then
press and hold to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to those functions.
96
SIENNA_OM_OM08025U_(U)
The settings of the following items can be changed, refer to P. 540
?
Language
Select to change the language on the display.
?
Units
Select to change the unit for measure of the fuel consumption and
outside temperature.
?
Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive infor-
mation screen, up to 3 Drive information screens can be set.
?
Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
(
?
switch settings
You can register 1 screen as the top screen. To register, press and
hold
while the desired screen is displayed.
?
Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Instrument panel brightness adjustment display
• Route guidance display of the navigation system-linked system
(if equipped)
• Incoming call display of the hands-free phone system
• Shift position display
Settings display
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст