Toyota Sienna (2019 year). Instruction — part 9

SIENNA_OM_OM08025U_(U)

129

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

WARNING

?

When opening or closing the sliding doors with windows open, keep all
body parts clear of the windows.

?

If anyone is in the vicinity, make sure they are safe and let them know that
the sliding door is about to open or close.

?

Do not leave the sliding door at half-opened position because the sliding
door is not latched at this position. The sliding door may move unexpect-
edly on an incline.

?

When the vehicle is stopped on a slope,
the door will slide faster when opening
or closing, so be especially careful that
the passengers do not get hit or
pinched by the door.

?

Open the sliding door fully while pas-
sengers are getting on or off on a down-
ward slope. Do not operate the outside
handle or inside handle while the door
is open as the door could suddenly
close by itself causing injury.

?

When closing the sliding door, take
extra care to prevent your fingers etc.
from being caught.

130

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

WARNING

?

Sliding door closer (if equipped)

?

Use caution when using the sliding door closer. The sliding door closer
operates even when the power sliding door system is canceled.

?

Power sliding doors (vehicles with power sliding doors)
Observe the following precautions when the power sliding door system is
on.
Failure to do so may cause death or serious injury.

?

When using the door handle to open or close the power sliding door,
remove your hand from the door handle immediately after starting power
sliding door operation. If you leave your hand on the door handle during
operation, your hand, fingers, wrist etc. may be subjected to an excessive
amount of force.

?

Check the safety of the surrounding area to make sure there are no obsta-
cles or anything that could cause any of your belongings to get caught.

?

In the event that the sliding door is left
slightly open, the sliding door closer will
automatically close it to the fully closed
position. It takes several seconds
before the sliding door closer begins to
operate. Be careful not to catch fingers
or anything else in the sliding door, as
this may cause bone fractures or other
serious injuries.

?

Do not get in and out of the vehicle
while the power sliding door is being
operated.

?

If anyone is in the vicinity, make sure
they are safe and let them know that the
sliding door is about to open or close.
Also, do not operate the power sliding
door if anyone inside or outside the
vehicle is leaning against the vehicle in
the area around the sliding door.

SIENNA_OM_OM08025U_(U)

131

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

WARNING

?

If the power sliding door system is turned off with the main switch while the
sliding door is operating automatically, the automatic operation is stopped.
The sliding door then has to be operated manually. Take extra care when
on an incline, as the sliding door may open or close unexpectedly.

?

If the operating conditions of the power sliding door are no longer met, a
buzzer may sound and the sliding door may stop opening or closing. The
sliding door then has to be operated manually. Take extra care when on an
incline, as the sliding door may open or close abruptly.

?

On an incline, a sliding door may close by itself after it opens automati-
cally. Make sure the sliding door is fully open and secure.

?

In the following situations, the power sliding door may detect an abnormal-
ity and automatic operation may be stopped. In this case, the sliding door
has to be operated manually. Take extra care when on an incline, as the
sliding door may open or close abruptly.
• When the sliding door contacts an obstacle
• When the battery voltage suddenly drops, such as when the engine

switch is turned to the “ON” position (vehicles without a smart key sys-
tem) or IGNITION ON mode (vehicles with a smart key system) or the
engine is started during automatic operation

?

Do not attach any accessories other than genuine Toyota parts to the
power sliding door. The power sliding door may not operate, causing itself
to malfunction, or the power sliding door may close again after it is
opened.

?

When the child-protector locks are set, make sure to turn off the power
sliding door system with the main switch in order to totally disable the sys-
tem.

?

Jam protection function (vehicles with power sliding doors)
Observe the following precautions.
Failure to do so may cause death or serious injury.

?

Never use any part of your body to intentionally activate the jam protection
function.

?

The jam protection function may not work if something gets caught just
before the power sliding door fully closes. Be careful not to catch fingers or
anything else.

?

The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.

132

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

NOTICE

?

Sliding door

?

To prevent damage to your vehicle

?

Vehicles with the power sliding door:
• Do not apply excessive force when the sliding door is operating.
• Do not place your hand or foot near door hinges or rollers when the slid-

ing door is operating.

• Avoid forcibly opening the left side sliding door fully when the fuel filler

door is opened. Otherwise, the fuel filler door may be damaged.

• Take care not to damage the sensors (installed on the front edge of the

power sliding door) with a knife or other sharp object.

?

Make sure there is nothing in the doorway before closing.

?

Do not close the sliding door by applying the brakes. Doing so could cause
the sliding door to be damaged.

Make sure magazines are not bent or
protruding from the sliding door pockets.
Do not insert anything too big so that the
shape of the sliding door pockets is dis-
torted. Such objects may obstruct the
opening/closing of the sliding doors,
damage the sliding door pockets or the
vehicle body, and may result in a mal-
function.

133

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

Back door

?

Entry function (vehicles with a smart key system)

Carry the electronic key to enable this function.

Press the unlock button to
unlock all the doors.

The door cannot be unlocked for
3 seconds after the door is
locked.
Lock the back door again when
you leave the vehicle. The back
door will not lock automatically
after it has been opened and
then closed.

Press the lock button to lock all the doors.

Check that the door is securely locked.

?

Wireless remote control

P. 111

?

Door lock switch

P. 114

The back door can be locked/unlocked and opened/closed by
the following procedures.

Locking and unlocking the back door

1

2

134

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

Press and hold the switch to open/
close the back door.

Pressing the switch again while the
power back door is operating will
cause the operation to reverse.
However, the reverse operation
cannot be performed for the first
second after automatic operation
starts even if the switch is pressed
again.

?

Back door opener

Raise the back door while
pressing the back door opener
to release the lock to open the
back door.

Opening/closing the back door from inside the vehicle (vehicles
with power back door)

Opening the back door from outside the vehicle

SIENNA_OM_OM08025U_(U)

135

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

?

Wireless remote control (vehicles with power back door)

Press and hold the switch to open/close the power back door.

Pressing the switch again while the power back door is operating will
cause the operation to reverse. However, the reverse operation cannot be
performed for the first second after automatic operation starts, even if the
wireless remote control switch is pressed again.

Press the switch to close the back
door.

Pressing the switch again while the
power back door is closing will
cause it to open again.
However, the reverse operation
cannot be performed for the first
second after automatic operation
starts even if the switch is pressed
again.

Vehicles without a smart key
system

Vehicles with a smart key sys-
tem

Power back door switch (if equipped)

136

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

Lower the back door using the
back door handle, and make sure
to push the back door down from
the outside to close it.

Turn the main switch off to disable
the power back door system.

Off
On

*

*

: The orange line at the top of the

switch indicates that the power
back door system is on.

When closing the back door

Canceling the power back door system (vehicles with power
back door)

1

2

SIENNA_OM_OM08025U_(U)

137

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

?

Luggage compartment light

?

If the back door opener is inoperative
The back door can be operated from the inside.

Move the lever.

The luggage compartment light turns on
when the back door is opened with the
luggage compartment light switch on.

On
Off

Remove the inside panel.

Vehicles without power back door

Vehicles with power back door

1

2

1

2

138

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

?

The power back door can be operated when (vehicles with power back
door)

?

The shift lever is in P.

?

The back door is unlocked.

?

Power back door operation (vehicles with power back door)

?

A buzzer sounds and the emergency flashers flash twice to indicate that the
back door is opening/closing.

?

The back door can be opened and closed manually even when the power
back door main switch is off.

?

Jam protection function (vehicles with power back door)

?

If anything obstructs the power back door while it is closing or opening, the
back door will automatically operate in the opposite direction.

?

If the jam protection function operates during two consecutive closing oper-
ations, the back door will be stopped at that position.

?

Back door closer (if equipped)
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.

?

When the battery is disconnected

?

The back door will be automatically locked after the battery is reconnected.

?

The power back door (if equipped) must be initialized in order to ensure
proper operation.

Unlock the back door with the wireless remote control or door lock switch.
Close the back door completely by hand.

?

Conditions affecting the operation of the smart key system or wireless
remote control
P. 118

1

2

SIENNA_OM_OM08025U_(U)

139

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

WARNING

Observe the following precautions.
Failure to do so may result in death or serious injury.

?

Before driving

?

Make sure that the back door is fully closed. If the back door is not fully
closed, it may open unexpectedly while driving and hit near-by objects or
luggage in the luggage compartment may be thrown out, causing an acci-
dent.

?

Do not allow children to play in the luggage compartment.
If a child is accidentally locked in the luggage compartment, they could
have heat exhaustion or other injuries.

?

Do not allow a child to open or close the back door.
Doing so may cause the back door to operate unexpectedly, or cause the
child’s hands, head, or neck to be caught by the closing back door.

?

Important points while driving
Never let anyone sit in the luggage compartment. In the event of sudden
braking, sudden swerving or a collision, they are susceptible to death or
serious injury.

?

Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the body to be caught, resulting in death
or serious injury.

?

Remove any heavy loads, such as snow and ice, from the back door
before opening it. Failure to do so may cause the back door to suddenly
shut again after it is opened.

?

When opening or closing the back door, thoroughly check to make sure
the surrounding area is safe.

?

If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.

?

Use caution when opening or closing the back door in windy weather as it
may move abruptly in strong wind.

?

The back door may suddenly shut if it is
not opened fully. It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.

140

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

WARNING

?

Do not place your hands on the back door damper stay to close the back
door, and do not hang on the back door damper stay.
Doing so may cause hands to be caught or the back door damper stay to
break, causing an accident.

?

If a bicycle carrier or similar heavy object is attached to the back door, it
may suddenly shut again after being opened, causing someone’s hands,
head or neck to be caught and injured. When installing an accessory part
to the back door, using a genuine Toyota part is recommended.

?

Back door closer (if equipped)

?

Use caution when using the back door closer as it still operates when the
power back door system is canceled.

?

Power back door (vehicles with power back door)
Observe the following precautions when operating the power back door.
Failure to do so may cause death or serious injury.

?

Check the safety of the surrounding area to make sure there are no obsta-
cles or anything that could cause any of your belongings to get caught.

?

If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.

?

If the operating conditions of the power back door are no longer met, a
buzzer may sound and the back door may stop opening or closing. The
back door then has to be operated manually. Take extra care when on an
incline, as the back door may open or close abruptly.

?

On an incline, the back door may suddenly shut after it opens. Make sure
the back door is fully open and secure.

?

When closing the back door, take extra
care to prevent your fingers etc. from
being caught.

?

When closing the back door, make sure
to press it lightly on its outer surface. If
the back door handle is used to fully
close the back door, it may result in
hands or arms being caught.

?

In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position. It takes several seconds
before the back door closer begins to
operate. Be careful not to catch fingers
or anything else in the back door, as this
may cause bone fractures or other seri-
ous injuries.

SIENNA_OM_OM08025U_(U)

141

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

WARNING

?

In the following situations, the power back door may detect an abnormality
and automatic operation may be stopped. In this case, the back door has
to be operated manually. Take extra care when on an incline, as the back
door may open or close abruptly.
• When the back door contacts an obstacle
• When the battery voltage suddenly drops, such as when the engine

switch is turned to the “ON” position (vehicles without a smart key sys-
tem) or IGNITION ON mode (vehicles with a smart key system) or the
engine is started during automatic operation

?

If a bicycle carrier or similar heavy object is attached to the back door, the
power back door may not operate, causing itself to malfunction, or the
back door may move in the closing direction after being opened, causing
someone’s hands, head or neck to be caught and injured. When installing
an accessory part to the back door, ask your Toyota dealer for details.

?

Jam protection function (vehicles with power back door)
Observe the following precautions.
Failure to do so may cause death or serious injury.

?

Although the back door stops closing when the jam protection function
detects an object, take extra care as you may still be injured if part of your
body is already caught.

?

Never use any part of your body to intentionally activate the jam protection
function.

?

The jam protection function may not work if something gets caught just
before the back door fully closes. Be careful not to catch fingers or any-
thing else.

?

The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.

142

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

NOTICE

?

Back door damper stays
The back door is equipped with damper stays that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to the back door damper stay, resulting
in malfunction.

?

Do not place your hand on the damper stay or apply lateral forces to it.

?

To prevent back door closer malfunction
Do not apply excessive force to the back door while the back door closer is
operating.

?

To prevent damage to the power back door

?

Make sure that there is no ice between the back door and frame that
would prevent movement of the back door. Operating the power back door
when excessive load is present on the back door may cause a malfunc-
tion.

?

Do not apply excessive force to the back door while the power back door
is operating.

?

Take care not to damage the sensors (installed on the right and left edges
of the power back door) with a knife or other sharp object. If the sensor is
disconnected, the power back door will not operate in automatic operation.

?

Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.

?

Do not touch the damper stay rod with
gloves or other fabric items.

?

Do not attach any accessories other
than genuine Toyota parts to the back
door.

Damper stays

143

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

3

Op
eration

o

f each

compo

nen
t

Smart key system

?

Locks and unlocks the doors

• Front door handles (

P. 110)

• Sliding door handles (

P. 121)

• Back door (

P. 133)

?

Starts and stops the engine (

P. 228)

?

Antenna location

: If equipped

The following operations can be performed simply by carrying
the electronic key on your person, for example in your pocket.
The driver should always carry the electronic key.

Antennas outside cabin
Antennas inside cabin
Antenna outside luggage compartment

1

2

3

144

SIENNA_OM_OM08025U_(U)

3-2. Opening, closing and locking the doors

?

Effective range (areas within which the electronic key is detected)

The system can be operated when the electronic key is inside the vehi-
cle.

?

Alarms and warning indicators
An alarm sounds and warning messages are displayed on the multi-informa-
tion display are used to protect against unexpected accidents or theft of the
vehicle resulting from erroneous operation. When a warning message is dis-
played, take appropriate measures based on the displayed message.
(

P. 481)

When only an alarm sounds, circumstances and correction procedures are as
follows.

When locking or unlocking the doors
The system can be operated when
the electronic key is within about
2.3 ft. (0.7 m) of either of the front out-
side door handles. (Only the doors
detecting the key can be operated.)
When starting the engine or changing
engine switch modes

Alarm

Situation

Correction procedure

Exterior

alarm

sounds once for 10
seconds

An attempt was made to
lock the vehicle while a door
is open

Close all of the doors
and lock the doors
again

Interior alarm pings
continuously

The engine switch was
turned

to ACCESSORY

mode while the driver’s door
was open (or the driver’s
door was opened while the
engine switch was in
ACCESSORY mode)

Turn the engine switch
off and close the
driver’s door

Была ли эта страница вам полезна?
Да!Нет
4 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности