Toyota Prius Prime (2022 year). Manual in english — page 10
161
2
Plug-
■
When charging schedules are ignored
When the following operations are performed while the charging schedule is
on standby, charging schedule is temporarily canceled and charging is
started.
●
When the Remote Air Conditioning System (
P. 531) is operated
●
When turning “Charge Now” on (
●
When an operation that temporarily cancels charging using the charging
schedule is performed (
■
Effects of outside temperature
When the charging mode is set to “Departure”, charging schedule may be
ignored due to the outside temperature and charging may start.
■
“Traction Battery Cooler” (
When charging is carried out using the charging schedule, the hybrid battery
(traction battery) cooling function may operate according to the temperature
of the hybrid battery (traction battery).
●
When the charging mode is set to “Start”, cooling starts at the set charging
start time.
●
When the charging mode is set to “Departure”, cooling starts approximately
30 minutes before the charging start time. However, if there is no time to fin-
ish charging by the charging schedule, the hybrid battery (traction battery)
cooling time may be shortened and “Traction Battery Cooler” may not oper-
ate.
162
When operating charging schedule, use the charging schedule switch
and meter control switches.
Charging schedule switch
Meter control switches
(
Multi-information display
■
Registering the charge schedule
Press the charging schedule switch.
The “Charge Schedule” screen will display on the multi-information dis-
play.
Press
or
of the
meter control switches to
select “Scheduled Events”,
and then press
.
The “Scheduled Events” screen
will display.
Press
or
of the
meter control switches to
select “+”, and then press
.
The “Edit Charging Event”
screen will display.
Setting operations on multi-information display
1
2
3
1
2
3
163
2
Plug-
Press
or
of the
meter control switches to
select the charging mode/
time settings row, and then
press
.
The charging mode/time set-
tings screen will display.
The clock display (12-hour dis-
play/24-hour display) changes
according to the clock settings.
(
Press
or
of the
meter control switches to
select the item to change
with the cursor, and then
press
or
to change
the setting.
Set the desired charging mode
and charging start (or departure)
time.
When the charging mode is “Start”, this sets the charging start time.
When it is “Departure”, this sets the charging end time.
After changing the settings to the desired settings, press
to return to
the previous screen.
To activate the repeated set-
ting, press
or
of the
meter control switches to
select “Repeat”, and then
press
.
A screen where the repeated
day can be selected will display.
4
5
6
164
Press
or
of the
meter control switches to
select the desired day to acti-
vate for the repeated setting,
and then press
.
Each time
is pressed, the
repeated
setting
switches
between on and off.
When set to on, the selected day is highlighted and the charging sched-
ule is repeated on that day. It is possible to set more than one day to on.
If no days are set to on, charging is only carried out once according to
the charging schedule for the next 24 hours.
After changing the settings to the desired settings, press
to return to
the previous screen.
When the charging mode is
set to “Departure”, set the
“Climate Prep” (
P. 158) to
on or off.
To turn the function on and oper-
ate the air conditioning, press
or
of the meter control
switches to select “Climate
Prep”, and then press
.
Each time
is pressed, the function switches between on and off.
After setting operations are
complete, press
.
A screen where the settings can
be saved will display.
Press
or
of the meter
control switches to select “Yes”,
and then press
to save the
settings.
If you wish to change the settings, select “No” and perform the setting
procedure from step again.
After setting operations are complete, when the charging cable is con-
nected to the vehicle, charging will be carried out according to the
charging schedule settings.
7
8
9
3
165
2
Plug-
■
Changing the registered charge schedules
The registered charge schedules can be turned on, off, deleted or
modified.
Press the charging schedule switch.
The “Charge Schedule” screen will display on the multi-information dis-
play.
Press
or
of the
meter control switches to
select “Scheduled Events”,
and then press
.
The “Scheduled Events” screen
is displayed, which displays a
list of the registered charge
schedule.
Press
or
of the
meter control switches to
select the item to change,
and then press
.
The “Edit Charging Event”
screen will display.
Press
or
of the
meter control switches to
select the item to operate
and perform the necessary
operation.
1
2
3
4
166
●
“ON/OFF”
Each time
of the meter control switch is pressed, the
selected charge schedule switches between “On” and “Off”.
When set to “Off”, a charging schedule is ignored and charging accord-
ing to the charging schedule is not carried out.
When
is pressed, setting is complete.
●
“Edit”
Change the desired settings as described starting from step
of the “Registering the charge schedule” procedure. (
Press
or
of the
meter control switches to
select “Yes”, and then press
to save the charging
schedule.
Press
to return to the previ-
ous screen.
When canceling any changes, select “No” and then press
.
●
“Delete”
Pressing
of the meter control switch displays a deletion con-
firmation screen.
Press
or
of the
meter control switches to
select “Yes”, and then press
to delete the selected
charge schedule.
Press
to return to the previ-
ous screen.
To cancel deletion, select “No” and then press
.
4
167
2
Plug-
■
Setting “Charge Now” to “On”
The “Charge Now” setting can be changed by performing one of the
two following procedures.
Operation on “Charge Schedule” screen
Press the charging schedule switch.
The “Charge Schedule” screen will display on the multi-information dis-
play.
Press
or
of the
meter control switches to
select “Charge Now”, and
then press
.
Each time
is pressed,
“Charge Now” switches between
“On” and “Off”.
Operation on “Ending” screen
Turn the power switch off.
The “Ending” screen is displayed on the multi-information display.
(
While the “Ending” screen is
displayed, press
or
of the meter control switches
to display the “Next Event”
screen.
*
*
: When the power switch is turned
off, the “Charge Now” setting
screen may be displayed.
Press
to set “Charge Now” to “On”.
Each time
is pressed, “Charge Now” switches between “On” and
“Off”.
After setting operations are complete, charging starts when the
charging cable is connected. (
1
2
1
2
3
168
■
Changing “Next Charging Event”
*
*
: When “Charge Now” is set to “On” etc., it is not possible to change the reg-
istered “Next Charging Event”.
Press the charging schedule switch.
The “Charge Schedule” screen will display on the multi-information dis-
play.
Press
or
of the
meter control switches to
select
“Next
Charging
Event”, and then press
.
The “Edit Next Charging Event”
screen will display.
Press
or
of the
meter control switches to
select the item to change,
and then press
.
Change the registered settings
in accordance with the following
table.
1
2
3
Setting
Operation
Charging Mode/Time
Operate
,
,
and
of the meter control
switches to set the charging mode (“Start” or
“Departure”) and charging start (or departure) time.
After changing the settings, press
to return the
previous screen.
“Day”
Operate
or
of the meter control switches to
select the day to carry out charging according to the
charging schedule.
After changing the setting, press
to return the
previous screen.
“Climate Prep”
This can be set when the charging mode is set to
“Departure”. Each time
is pressed, air condition-
ing-linked operation switches between “On” and
“Off”.
169
2
Plug-
After setting operations are
complete, press
.
A confirmation screen of chang-
ing “Next Charging Event” will
display.
Press
or
of the meter
control switches to select “Yes”,
and then press
to save the
charging schedule.
Press
to return to the previous screen.
When canceling the “Next Charging Event”, select “No” and then press
.
■
Charging schedule switch
●
The charging schedule switch functions regardless of the condition of the
power switch.
However, when the charging schedule switch is pressed while the power
switch is not turned to ON mode, if the meter control switches are not oper-
ated for a certain amount of time after the charging schedule setting screen
is displayed, the display automatically turns off.
●
The charging schedule switch cannot be used while driving.
■
When charging schedule setting operations are canceled
When the vehicle is in the following conditions, charging schedule setting
operations are canceled.
●
A message is displayed while performing a setting operation
●
The power switch is operated before the settings are confirmed
●
The vehicle starts off
●
A display with a higher priority than that of the charging schedule setting is
shown
■
Charging schedule
The “Charge Schedule” screen can be displayed and setting operations can
be performed from the “Vehicle Settings” setting on the multi-information dis-
play. (
■
“Next Charging Event”
After charging completes, the “Next Charging Event” displayed on the multi-
information display will not change until the charging cable is removed, even
after charging is performed according to the “Next Charging Event” schedule.
4
170
■
To return to original setting after changing “Next Charging Event” set-
ting
Turning the setting of “Charge Now” on and then off can return the setting of
“Next Charging Event” to its original setting.
■
When “Next Charging Event” is changed while charging
●
When the charging mode is “Departure”, the current charging is interrupted
or continued depending on the remaining time until the charging is com-
pleted.
●
When the charging mode is “Start”, the current charging is interrupted, the
next charging will start at the set time.
■
When the power switch is turned off
*
2
: When the power switch is turned off, the “Next Charging Event” confirma-
tion screen may be displayed.
It is possible to check the next charge
schedule (“Next Charging Event”) by oper-
ating
or
of the meter control
switches while the power switch is turned
off and the “Ending” screen
*
1
(
P. 196) is
displayed.
*
2
*
1
: The “Ending” screen may not be dis-
played during charging.
WARNING
■
Cautions while performing the setting operation
When performing the setting operation while the hybrid system is operated,
ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon
monoxide (CO) may collect and enter the vehicle. This may lead to death or
a serious health hazard.
NOTICE
■
While performing the setting operation
When performing the setting operation while the hybrid system is stopped,
be careful that the 12-volt battery will not be discharged.
171
2
Plug-
Setting operations related to the charging schedule are performed on
the “Charge Schedule” screen.
For details on how to operate the 11.6-inch display, refer to “NAVIGATION
SYSTEM OWNER’S MANUAL”.
■
Displaying the “Charge Schedule” screen
Press the “MENU” button to
display the menu screen.
Select “Info” and “Charge
Schedule”, in that order.
The “Charge Schedule” screen
will display.
Setting operations on the 11.6-inch display (if equipped)
1
2
172
■
How to read the “Charge Schedule” screen
Charge schedules (calendar display)
Displays the week-long registered charge schedule in a list using icons.
“Add” button
Press to add a new item to the charge schedule. (
Charge schedules (list display)
A list of items on the registered charge schedule is displayed. If there are
more than 3 registered items, the list can be scrolled up and down to
change the displayed items.
“Edit” button
Press to change or delete registered items on the charge schedule.
(
Return button
Press to close the “Charge Schedule” screen.
Charge schedules (icon display)
When an item is registered on the charge schedule, an icon is displayed
on the calendar.
“Charge Now” button
Press to set “Charge Now” to on. (
1
2
3
4
5
6
7
173
2
Plug-
“ON”/“OFF” button
The charge schedule switches between “ON” and “OFF” each time this
button is pressed. (
Scroll bar
When the number of registered charge schedules exceeds 3, the dis-
played contents can be changed by operating the button.
Main content displayed on the calendar:
*
1
: A row with a red line indicates the current time.
*
2
: While a registered setting is being changed, the icon of the related setting
is highlighted (except when the icon overlaps with another icon).
*
3
: When “Charge Now” (
P. 176) is set to on, the orange icon moves to the
position of the red line and changes to display “Charge Now”.
*
4
: The content of the charge schedule that corresponds to the “Next Charging
Event” is not displayed in the list.
■
Registering the charge schedule
Display the “Charge Schedule” screen. (
Press “Add”.
The settings screen will display on the bottom of the screen.
8
9
Display
Content
Red line
*
1
Current time
Orange icon
*
2, 3
Charge schedule for “Next Charging Event”
*
4
Green icon
*
2
The charging mode is set to “Departure”
Blue icon
*
2
The charging mode is set to “Start”
1
2
174
Select the charging mode.
Press “Start” or “Departure” to turn the button (charging mode) on and
highlight the button.
Operate the time setting wheel to set the start (or departure)
time.
When the charging mode is “Start”, set the charging start time (start
time). When it is “Departure”, set the charging end time (departure
time).
Operate the each wheel up and down to display the desired time in the
center.
When activating the repeated settings, press the desired day but-
ton.
Each time the button is pressed, the repeated setting for the selected
day switches between on and off.
When turned on, the button is highlighted and the charging schedule is
repeated on that day. It is possible to turn more than one day on.
If no buttons are turned on, charging is only carried out once according
to the charging schedule for the next 24 hours.
When the charging mode is set to “Departure”, set the “Climate
Prep” (
P. 158) to on or off.
To operate the air conditioning, press the “Climate Prep” button to set
the function to “ON”.
Each time the button is pressed, the function switches between “ON”
and “OFF”.
After setting operations are complete, press “Save”.
The charge schedule is added to the list and an icon is added to the cal-
endar.
To cancel registration of the charging schedule, press
.
After setting operations are complete, when the power switch is turned
off and the charging cable is connected to the vehicle, charging is car-
ried out according to the charging schedule settings.
3
4
5
6
7
175
2
Plug-
■
Switching charge schedules between “ON” and “OFF”
Display the “Charge Schedule” screen. (
From the items in the list displayed on the bottom of the screen,
press “ON” or “OFF” in the row of the charge schedule you wish
to change.
Setting “ON” or “OFF” is possible by sliding the bar to the left or right.
If the charge schedule you wish to change is not displayed on the bot-
tom of the screen, scroll the list up and down to display it.
Each time the button is pressed, the charge schedule switches between
“ON” and “OFF”.
■
Changing the registered charge schedules
Display the “Charge Schedule” screen. (
From the items displayed on the bottom of the screen, press
“Edit” in the row of the charge schedule you wish to change.
The settings screen will display on the bottom of the screen.
It is also possible to display the settings screen by pressing the icon of
the charge schedule you wish to change from those displayed on the
calendar.
1
2
1
2
176
●
Changing registered items:
Change the desired settings as described in step
to step
of
the “Registering the charge schedule” procedure. (
When a setting is changed, its icon on the calendar also changes.
●
Deleting registered items:
Press “Delete”.
A deletion confirmation message will display.
Press “Yes” to delete the selected charge schedule.
To cancel deletion, press “No”.
When a charge schedule is deleted, its icon is also deleted from the cal-
endar.
■
Turning “Charge Now” on
The “Charge Now” setting can be changed by performing one of the
two following procedures.
Operations on “Charge Schedule” screen
Display the “Charge Schedule” screen. (
Press “Charge Now”.
Each time the button is pressed, “Charge Now” switches between on
and off and the indicator on the button turns on and off.
3
7
1
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст