Toyota Tundra. Manual — part 351
a. Connect the door control switch connector and power window regulator connector.
Fig. 93: Identifying Door Control Switch Connector And Power Window Regulator
Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Attach the 2 clips and 5 claws to install the armrest base panel.
Fig. 94: Identifying Clips And Claws Of Armrest Base Panel
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
UNLOCK WARNING SWITCH
COMPONENTS
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 95: Identifying Unlock Warning Switch Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Telescopic) (See
REMOVAL )
2. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic) (See
REMOVAL )
3. REMOVE UNLOCK WARNING SWITCH ASSEMBLY
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
a. Disconnect the unlock warning switch connector.
Fig. 96: Identifying Unlock Warning Switch Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Detach the 3 claws and remove the cover.
c. Remove the contact pin cap.
d. Remove the unlock warning switch.
Fig. 97: Identifying Unlock Warning Switch
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 98: Identifying Unlock Warning Switch Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Measure the resistance according to the value(s) in the table below.
Standard resistance
UNLOCK WARNING SWITCH ASSEMBLY STANDARD RESISTANCE
SPECIFICATION
If the result is not as specified, replace the unlock warning switch assembly.
INSTALLATION
1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY
Tester Connection Switch Condition Specified Condition
1 - 2
Not pushed
10 kohms or higher
Pushed
Below 1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст