Toyota Tundra. Manual — part 690
Fig. 567: Identifying Seat Heater Switch Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL SEAT HEATER SWITCH LH
a. Attach the 2 claws to install the seat heater switch.
Fig. 568: Identifying Seat Heater Switch Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Connect the integration control and panel connectors.
b. Attach the 4 clips to install the panel.
Fig. 569: Identifying Integration Control And Panel Assembly Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY (See INSTALLATION )
5. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL (See INSTALLATION )
6. INSTALL ASH RECEPTACLE LIGHT BULB
7. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See INSTALLATION )
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See
INSTALLATION )
9. INSTALL INSTRUMENT SIDE PANEL LH (See INSTALLATION )
10. INSTALL COWL SIDE TRIM BOARD LH
a. for Double Cab:
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Install the cowl side trim board (See INSTALLATION ).
b. for Regular Cab:
Install the cowl side trim board (See INSTALLATION ).
11. INSTALL FRONT DOOR SCUFF PLATE LH
a. for Double Cab:
Install the front door scuff plate (See INSTALLATION ).
b. for Regular Cab:
Install the front door scuff plate (see INSTALLATION ).
SEAT HEATER SWITCH (FOR FLOOR SHIFT TYPE)
COMPONENTS
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Fig. 570: Identifying Seat Heater Switch Components (For Floor Shift Type)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH
a. for Double Cab:
Remove the front door scuff plate (see REMOVAL ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
b. for Regular Cab:
Remove the front door scuff plate (see REMOVAL ).
2. REMOVE COWL SIDE TRIM BOARD LH
a. for Double Cab:
Remove the cowl side trim board (see REMOVAL ).
b. for Regular Cab:
Remove the cowl side trim board (see REMOVAL ).
3. REMOVE INSTRUMENT SIDE PANEL LH (See REMOVAL )
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See
REMOVAL )
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See REMOVAL )
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See REMOVAL )
7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (See REMOVAL )
8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (See REMOVAL )
9. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL (See REMOVAL )
10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Detach the 4 clips.
b. Disconnect the integration control and panel connectors and remove the panel.
Fig. 571: Identifying Integration Control And Panel Assembly Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11. REMOVE SEAT HEATER SWITCH LH
a. Detach the 2 claws and remove the seat heater switch.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст