Toyota Tundra. Manual — part 1680

INSPECTION

1. INSPECT FLUID COUPLING ASSEMBLY

a. Check that the fluid coupling is not damaged and that no silicon oil leaks.

If necessary, replace the fluid coupling.

Fig. 28: Checking That Fluid Coupling Is Not Damaged And That No Silicon Oil Leaks
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. INSPECT FAN BRACKET SUB-ASSEMBLY

a. Check the turning smoothness of the fan bracket. If necessary, replace the fan bracket.

Fig. 29: Checking Turning Smoothness Of Fan Bracket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

INSTALLATION

1. INSTALL FAN

a. Install the fan to the fluid coupling with the 4 nuts.

Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)

2009 Toyota Tundra

2009 ENGINE Cooling (2UZ-FE) - Tundra

Fig. 30: Identifying Fan Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. INSTALL FAN SHROUD (see INSTALLATION )

3. INSTALL RADIATOR HOSE INLET

4. INSTALL AIR CLEANER HOSE ASSEMBLY (See INSTALLATION )

5. ADD ENGINE COOLANT (see COOLANT )

6. INSPECT FOR COOLANT LEAK (see ON-VEHICLE INSPECTION )

7. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY (See INSTALLATION )

8. INSTALL NO. 1 ENGINE UNDER COVER (See REPLACEMENT )

RADIATOR

COMPONENTS

2009 Toyota Tundra

2009 ENGINE Cooling (2UZ-FE) - Tundra

Fig. 31: Identifying Radiator Replacement Components With Torque Specifications (1 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2009 Toyota Tundra

2009 ENGINE Cooling (2UZ-FE) - Tundra

Fig. 32: Identifying Radiator Replacement Components With Torque Specifications (2 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2009 Toyota Tundra

2009 ENGINE Cooling (2UZ-FE) - Tundra