Toyota Tundra. Manual — part 201

INSPECTION PROCEDURE

1. CHECK CD

a. Check the CD.

OK: The CD is clean.

HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial
direction.

NG: CLEAN CD

Fig. 179: Cleaning Disc Surface With Soft Dry Cloth
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: Go to next step.

2. CHECK CD

a. Check that the CD is not deformed or cracked.

OK: No deformation or cracks on the CD.

NG: CHANGE DISC

NOTE:

Do not use a conventional record cleaner or antistatic preservative.

2009 Toyota Tundra

2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra

Fig. 180: Checking Disc For Deformed Or Cracked
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: Go to next step.

3. CHECK OPERATION USING ANOTHER CD

a. Check if the problem recurs using another CD.

OK: The problem does not occur.

NG: Go to step 4

OK: END

4. CHECK RADIO RECEIVER

a. Check that the radio receiver is properly installed.

OK: Radio receiver is properly installed.

Result:

RESULT REFERENCE

B: REPLACE RADIO RECEIVER (see REMOVAL )

C: REPLACE RADIO RECEIVER (see REMOVAL )

A: REINSTALL RADIO RECEIVER PROPERLY

RADIO BROADCAST CANNOT BE RECEIVED (BAD RECEPTION)

INSPECTION PROCEDURE

Result

Proceed to

NG

A

OK (for Column Shift Type)

B

OK (for Floor Shift Type)

C

2009 Toyota Tundra

2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra

1. CHECK IF RADIO AUTO-SEARCH FUNCTIONS PROPERLY

a. Perform the auto-search of the radio and check that it functions normally.

OK: Radio auto-search functions normally.

Result:

RESULT REFERENCE

B: REPLACE RADIO RECEIVER (see REMOVAL )

C: REPLACE RADIO RECEIVER (see REMOVAL )

A: Go to next step.

2. CHECK OPTIONAL COMPONENTS

a. Check if the telephone antenna, and other optional components are installed.

OK: Optional component(s) installed.

NG: Go to step 3

OK: EFFECT FROM OPTIONAL COMPONENTS

3. CHECK ANTENNA FOR NOISE PRODUCTION

a. With the ignition switch ACC, turn on the radio and choose the AM mode.

b. Place the tip of a screwdriver on the antenna and check that noise is heard from the speakers.

OK: Noise is heard.

Result:

RESULT REFERENCE

B: REPLACE RADIO RECEIVER (see REMOVAL )

Result

Proceed to

NG

A

OK (for Column Shift Type)

B

OK (for Floor Shift Type)

C

Result

Proceed to

NG

A

OK (for Column Shift Type)

B

OK (for Floor Shift Type)

C

2009 Toyota Tundra

2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra

C: REPLACE RADIO RECEIVER (see REMOVAL )

A: Go to next step.

4. CHECK RADIO RECEIVER (ANTENNA)

a. Remove the antenna plug of the radio receiver.

b. With the radio receiver connector connected, turn the ignition switch ACC.

c. Turn on the radio and choose the AM mode.

d. Place a flat-head screwdriver or a piece of metal, such as a thin wire, on the antenna jack of the

radio receiver. Check that noise is heard from the speakers.

OK: Noise is heard.

Result:

RESULT REFERENCE

Fig. 181: Inspecting Radio Receiver (Antenna)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

B: REPLACE RADIO RECEIVER (see REMOVAL )

C: REPLACE RADIO RECEIVER (see REMOVAL )

A: REPLACE ANTENNA ASSEMBLY AND ANTENNA CORD SUB-ASSEMBLY

POOR SOUND QUALITY IN ALL MODES (LOW VOLUME)

INSPECTION PROCEDURE

1. CHECK AUDIO SETTINGS

a. Set "BASS", "MID", and "TREB" to the initial values and check that sound is normal.

Result

Proceed to

OK

A

NG (for Column Shift Type)

B

NG (for Floor Shift Type)

C

2009 Toyota Tundra

2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra