Toyota Tundra. Manual — part 2149
Fig. 59: Identifying Pressure Regulator Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Remove the O-ring from the pressure regulator.
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
a. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the pressure regulator.
b. While turning the pressure regulator left and right, install it to the delivery pipe.
Fig. 60: Identifying Pressure Regulator
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the 2 bolts.
Torque: 10 N*m (107 kgf*cm, 7 ft.*lbf)
NOTE:
Make sure that there are no scratches or foreign matter in or
around the insertion hole of the delivery pipe.
When inserting the injector, be careful not to damage the O-ring.
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Fig. 61: Identifying Pressure Regulator Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Connect the vacuum sensing hose to the pressure regulator.
Fig. 62: Identifying Vacuum Sensing Hose Of Pressure Regulator
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Connect the No. 2 fuel tube to the pressure regulator (see FUEL SYSTEM ).
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Fig. 63: Identifying No. 2 Fuel Tube Of Pressure Regulator
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
3. INSTALL AIR CLEANER HOSE ASSEMBLY (See INSTALLATION )
4. INSTALL V-BANK COVER (See INSTALLATION )
5. CHECK FOR FUEL LEAK (see INSTALLATION )
FUEL PUMP
COMPONENTS
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Fig. 64: Identifying Fuel Pump Components With Torque Specifications (1 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 65: Identifying Fuel Pump Components With Torque Specifications (2 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст