Toyota Tundra. Manual — part 334
Fig. 43: Power Window Regulator Master Switch
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE POWER WINDOW REGULATOR MASTER SWITCH (see REMOVAL )
OK: Go to next step
3. CHECK HARNESS AND CONNECTOR (DOOR LOCK SWITCH - MAIN BODY ECU)
a. Disconnect the N2 switch connector.
b. Disconnect the DD ECU connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
HARNESS AND CONNECTOR (DOOR LOCK SWITCH - MAIN BODY ECU)
STANDARD RESISTANCE SPECIFICATION
Tester Connection
Condition Specified Condition
N2-2 (L) - DD-49 (L1)
Always
Below 1 ohms
N2-9 (UL) - DD-52 (UL1)
N2-1 (E) - Body ground
DD-49 (UL) - Body ground
Always
10 kohms or higher
DD-52 (UL1) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 44: Identifying N2 Switch And DD ECU Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE MAIN BODY ECU
4. INSPECT DOOR CONTROL SWITCH
a. Remove the door control switch (see REMOVAL ).
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
DOOR CONTROL SWITCH STANDARD RESISTANCE SPECIFICATION
Tester Connection Switch Condition Specified Condition
4 (L) - 3 (E)
Lock
Below 1 ohms
4 (L) - 3 (E)
OFF (Free)
10 kohms or higher
2 (UL) - 3 (E)
2 (UL) - 3 (E)
Unlock
Below 1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 45: Inspecting Door Control Switch
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE DOOR CONTROL SWITCH (see REMOVAL )
OK: Go to next step
5. CHECK HARNESS AND CONNECTOR (FRONT DOOR CONTROL SWITCH RH - MAIN
BODY ECU AND BODY GROUND)
a. Disconnect the M5 switch connector.
b. Disconnect the DD ECU connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
HARNESS AND CONNECTOR (FRONT DOOR CONTROL SWITCH RH - MAIN BODY
ECU AND BODY GROUND) STANDARD RESISTANCE SPECIFICATION
Tester Connection
Condition Specified Condition
M5-4 (L) - DD-49 (L1)
Always
Below 1 ohms
M5-2 (UL) - DD-40 (UL1)
M5-3 (E) - Body ground
DD-49 (L1) - Body ground
Always
10 kohms or higher
DD-40 (L1) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 46: Identifying Front Door Control Switch RH And Main Body ECU Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE MAIN BODY ECU
WIRELESS DOOR LOCK CONTROL SYSTEM
PARTS LOCATION
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст