Toyota Tundra. Manual — part 2907
F = Flange
Fig. 557: Identifying Plates, Discs & Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
29. INSTALL NO. 3 BRAKE PISTON
a. Coat 2 new O-rings with ATF, and install them to the brake piston.
b. Press the brake piston into the brake cylinder with both hands.
Fig. 558: Identifying No. 3 Brake Piston O-Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Using SST and a press, compress the return spring and install the snap ring with a screwdriver.
SST 09380-60010 (09381-06020, 09381-06040, 09381-06060, 09381-06100, 09381-06110)
NOTE:
Before assembling new discs, soak them in ATF for at least 2 hours.
NOTE:
Be careful not to damage the O-rings.
NOTE:
Be sure the end gap of the snap ring is not aligned with the spring
retainer claw.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 559: Compressing Return Spring Using SST & Press
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
30. INSTALL NO. 3 BRAKE CYLINDER WITH NO. 3 BRAKE PISTON AND NO. 3 BRAKE
PISTON RETURN SPRING SUB-ASSEMBLY
a. Install the No. 3 brake cylinder with the No. 3 brake piston and No. 3 brake piston return spring to
the transmission case.
Fig. 560: Identifying No. 3 Brake Cylinder With No. 3 Brake Piston & Return Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NOTE:
Align the oil holes of the No. 3 brake cylinder and transmission
case as shown below.
Make sure the No. 3 brake piston and cylinder are securely
inserted into the transmission case.
Fig. 561: Aligning Oil Holes Of No. 3 Brake Cylinder
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
31. INSTALL NO. 3 BRAKE PISTON HOLE SNAP RING
a. Using SST, install the snap ring.
SST 09350-30020 (09350-07060)
Fig. 562: Using SST To Install No. 3 Brake Piston Hole Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
32. INSTALL NO. 3 BRAKE DISC SET
a. Install the "O" mark flange, 4 discs, 3 plates and "A" mark flange to the transmission case.
Install in order:
OF - D - P - D - P - D - P - D - AF
HINT:
OF = "O" mark flange
P = Plate
D = Disc
AF = "A" mark flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NOTE:
Before assembling new discs, soak them in ATF for at least 2 hours.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 563: Identifying Flange, Discs & Plates
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
33. INSTALL NO. 3 BRAKE SNAP RING
a. Using a screwdriver, install the snap ring.
Fig. 564: Using Screwdriver To Install No. 3 Brake Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
34. INSTALL DIRECT CLUTCH PISTON SUB-ASSEMBLY
a. Coat 2 new O-rings with ATF, and install them to the direct clutch piston.
Fig. 565: Identifying Direct Clutch Piston O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the direct clutch return spring and No. 2 clutch balancer to the direct clutch piston.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст