Toyota Tundra. Manual — part 209
Fig. 200: Checking Harness And Connector (Stereo Component Amplifier - Front No. 1
Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
5. INSPECT FRONT NO. 2 SPEAKER
a. Disconnect the K10 and K12 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection Condition Specified Condition
1 (+) - 3 (TWL+)
Always
Below 1 ohms
2 (-) - 4 (TWL-)
3 (TWL+) - 4 (TWL-) Always
1.3 to 2.3 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 201: Identifying Front No. 2 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
for RH
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 2 SPEAKER (see REMOVAL )
OK: Go to next step.
6. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 2
SPEAKER)
a. Disconnect the K16 amplifier connector.
b. Disconnect the K10 and K12 speaker connectors.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection Condition Specified Condition
1 (+) - 3 (TWR+)
Always
Below 1 ohms
2 (-) - 4 (TWR-)
3 (TWR+) - 4 (TWR-) Always
1.3 to 2.3 ohms
Tester Connection
Condition Specified Condition
K16-8 (FL+) - K12-3 (TWL+)
Always
Below 1 ohms
K16-7 (FL-) - K12-4 (TWL-)
K16-8 (FL+) - Body ground
Always
10 kohms or higher
K16-7 (FL-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 202: Checking Harness And Connector (Stereo Component Amplifier - Front No. 2
Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
7. INSPECT FRONT NO. 3 SPEAKER
a. Disconnect the M1 and N1 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 3 SPEAKER (see REMOVAL )
Tester Connection
Condition Specified Condition
K16-2 (FR+) - K10-3 (TWR+)
Always
Below 1 ohms
K16-6 (FR-) - K10-4 (TWR-)
K16-2 (FR+) - Body ground
Always
10 kohms or higher
K16-6 (FR-) - Body ground
Tester Connection Condition Specified Condition
1 - 3
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 203: Identifying Front No.3 Speaker LH Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to next step.
8. CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 3 SPEAKER)
a. Disconnect the M1, N1, K10 and K12 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
Tester Connection
Condition Specified Condition
K12-1 (+) - N1-3
Always
Below 1 ohms
K12-2 (-) - N1-1
K12-1 (+) - Body ground
Always
10 kohms or higher
K12-2 (-) - Body ground
Tester Connection
Condition Specified Condition
K10-1 (+) - M1-3
Always
Below 1 ohms
K10-2 (-) - M1-1
K10-1 (+) - Body ground
Always
10 kohms or higher
K10-2 (-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст