Toyota Tundra. Manual — part 1033
Fig. 174: Identifying Rear Differential Carrier Assembly Nuts And Washers
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL REAR AXLE SHAFT LH
a. Install the rear axle shaft LH (see INSTALLATION ).
3. INSTALL REAR AXLE SHAFT RH
HINT:
Use the same procedures described for the LH side.
4. INSTALL PROPELLER SHAFT ASSEMBLY
a. Install the propeller shaft for 2WD (see INSTALLATION ).
b. Install the propeller shaft for 4WD (see INSTALLATION ).
5. ADD DIFFERENTIAL OIL (see REPLACEMENT )
6. INSTALL REAR WHEEL
a. Install the rear wheels.
Torque:
for aluminum wheel
131 N*m (1336 kgf*cm, 97 ft.*lbf)
for steel wheel
209 N*m (2131 kgf*cm, 154 ft.*lbf)
FRONT DIFFERENTIAL CARRIER ASSEMBLY (FOR 4WD)
COMPONENTS
NOTE:
Be careful not to damage the contact surfaces of the differential
carrier and rear axle housing.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Differential - Tundra
Fig. 175: Identifying Front Differential Carrier Assembly Replacement Components With Torque
Specifications (For 4WD) (1 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Differential - Tundra
Fig. 176: Identifying Front Differential Carrier Assembly Replacement Components With Torque
Specifications (For 4WD) (2 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Differential - Tundra
Fig. 177: Identifying Front Differential Carrier Assembly Replacement Components With Torque
Specification (For 4WD) (3 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Differential - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст