Toyota Tundra. Manual — part 1891
If any of the connecting rod cap bolts cannot meet the torque specification, replace the
connecting rod cap bolts
2
Mark the front of the connecting cap bolt with paint
3
Tighten the cap bolts another 90° as shown below
4
Check that the painted marks are now at a 90° angle to the front
Fig. 317: Identifying Painted Marks Angle To Front
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
g
Check that the crankshaft turns smoothly
FRONT CRANKSHAFT OIL SEAL
COMPONENTS
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 318: Identifying Air Cleaner Replacement Components With Torque Specifications (1 Of 6)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 319: Identifying Air Cleaner Replacement Components With Torque Specifications (2 Of 6)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 320: Identifying Air Cleaner Replacement Components With Torque Specifications (3 Of 6)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст