Toyota Tundra. Manual — part 114
6. INSPECT TRANSFER OIL (for 4WD) (See ON-VEHICLE INSPECTION )
7. INSPECT FRONT DIFFERENTIAL OIL (for 4WD) AND REAR DIFFERENTIAL OIL (See
REPLACEMENT )
8. LUBRICATE PROPELLER SHAFT (4WD ONLY) AND TIGHTEN BOLTS
a. for 4WD:
Lubricate the propeller shaft by referring to the lubrication chart. Before pumping in grease, wipe
off any mud and dust on the grease fitting.
PROPELLER SHAFT (4WD ONLY) GREASE SPECIFICATION
1. for Front propeller shaft
Fig. 3: Identifying Propeller Shaft Bolts (4WD Only) For Lubricate - For Front
Propeller Shaft
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. for Rear propeller shaft
AB60F
AUTOMATIC
TRANSMISSION FLUID
AB60E
AUTOMATIC
TRANSMISSION FLUID
Item
Grease Grade
Propeller Shaft Spicier Lithium base chassis grease NLGI No. 2
2009 Toyota Tundra
2009 MAINTENANCE Maintenance - Tundra
Fig. 4: Identifying Propeller Shaft Bolts (4WD Only) For Lubricate - For Rear
Propeller Shaft (1 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 5: Identifying Propeller Shaft Bolts (4WD Only) For Lubricate - For Rear
Propeller Shaft (2 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Tighten the bolts of the propeller shaft.
TIGHTENING BOLTS SPECIFICATION
Type
See Procedures
2009 Toyota Tundra
2009 MAINTENANCE Maintenance - Tundra
9. ROTATE TIRES (See INSPECTION )
BODY
GENERAL MAINTENANCE
1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
a. Where necessary, tighten all the parts of the chassis.
Front axle and suspension
Drivetrain
Rear axle and suspension
Brake system
Engine mounting, etc.
b. Where necessary, tighten all the parts of the body.
Seat belt system
Seat
Doors and hood
Body mountings
Fuel tank
Exhaust pipe system, etc.
2. REPLACE AIR CONDITIONING FILTER
a. Remove the glove compartment assembly.
b. Remove the filter case from the filter outlet.
c. Remove the filter from the filter case.
d. Replace the filter with a new one.
e. Install the filter case to the filter outlet.
f. Install the glove compartment assembly.
3. FINAL INSPECTION
a. Check the operation of the body parts.
1. Hood
Auxiliary catch operates properly.
Hood locks securely when closed.
2. Front and rear doors
Door locks operate properly.
2WD
PROPELLER SHAFT
ASSEMBLY (FOR 2WD)
4WD
PROPELLER SHAFT
ASSEMBLY (FOR 4WD)
2009 Toyota Tundra
2009 MAINTENANCE Maintenance - Tundra
Doors close properly.
3. Tail gate door
Door lock operates properly.
4. Seats
Seat adjusts easily and locks securely in any position.
Front seatback locks securely in any position.
Folding-down rear seatbacks lock securely.
5. Be sure to deliver a clean vehicle. Especially check:
Steering wheel
Shift lever knob
All switch knobs
Door handles
Seats
2009 Toyota Tundra
2009 MAINTENANCE Maintenance - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст