Toyota Tundra. Manual — part 2087
Fig. 48: Identifying Fuel Pressure Pulsation Damper Replacement Components With Torque
Specifications (3 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Fig. 49: Identifying Fuel Pressure Pulsation Damper Replacement Components (4 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1
DISCHARGE FUEL SYSTEM PRESSURE (see REMOVAL )
2
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
3
REMOVE NO. 1 ENGINE UNDER COVER (See REMOVAL )
4
DRAIN ENGINE COOLANT (See REPLACEMENT )
5
REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
a
Remove the front wiper motor and link (see REMOVAL )
6
REMOVE FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See REMOVAL )
7
REMOVE V-BANK COVER (See INSTALLATION )
8
REMOVE AIR CLEANER HOSE (See REMOVAL )
9
REMOVE AIR CLEANER ASSEMBLY WITH ELEMENT (See REMOVAL )
10
REMOVE INTAKE AIR SURGE TANK (See REMOVAL )
11
REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY
a
Remove the clip
Fig. 50: Identifying Fuel Pressure Pulsation Damper Assembly Clip
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Pull the fuel pressure pulsation damper out of the fuel delivery pipe
c
Remove the O-ring from the fuel pressure pulsation damper
INSTALLATION
1
INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
a
Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure
pulsation damper
b
Install the fuel pressure pulsation damper onto the fuel delivery pipe
c
Install the clip
the negative (-) battery terminal.
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Fig. 51: Identifying Fuel Pressure Pulsation Damper Assembly Clip
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
3
INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT (See INSTALLATION )
4
INSTALL AIR CLEANER HOSE (See INSTALLATION )
5
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6
ADD ENGINE COOLANT (See REPLACEMENT )
7
CHECK FOR FUEL LEAK (see INSTALLATION )
8
INSTALL V-BANK COVER (See INSTALLATION )
9
INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
10
INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
a
Install the front wiper motor and link assembly (see INSTALLATION )
11
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
FUEL PUMP
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст