Toyota Tundra. Manual — part 2034
Fig. 321: Identifying Worn Depth Of No. 3 Chain Tensioner
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14
INSPECT NO. 1 CHAIN TENSIONER SLIPPER LH
a
Measure the worn depth of the chain tensioner slipper
Maximum depth: 1.0 mm (0.0394 in.)
If the depth is greater than the maximum, replace the chain tensioner slipper
Fig. 322: Identifying Worn Depth Of No. 1 Chain Tensioner Slipper - LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15
INSPECT NO. 1 CHAIN TENSIONER SLIPPER RH
a
Measure the worn depth of the chain tensioner slipper
Maximum depth: 1.0 mm (0.0394 in.)
If the depth is greater than the maximum, replace the chain tensioner slipper
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 323: Identifying Worn Depth Of No. 1 Chain Tensioner Slipper - RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
16
INSPECT NO. 1 CHAIN VIBRATION DAMPER LH
a
Measure the worn depth of the chain vibration damper
Maximum depth: 1.0 mm (0.0394 in.)
If the depth is greater than the maximum, replace the chain vibration damper
Fig. 324: Identifying Worn Depth Of No. 1 Chain Vibration Damper - LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
17
INSPECT NO. 1 CHAIN VIBRATION DAMPER RH
a
Measure the worn depth of the chain vibration damper
Maximum depth: 1.0 mm (0.0394 in.)
If the depth is greater than the maximum, replace the chain vibration damper
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 325: Identifying Worn Depth Of No. 1 Chain Vibration Damper - RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
18
INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY LH
a
Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the
cylinder head
Maximum warpage: 0.7 mm (0.0276 in.)
If the warpage is greater than the maximum, replace the exhaust manifold
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 326: Measuring Warpage Of Contact Surface Of Cylinder Head - LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
19
INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY RH
a
Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the
cylinder head
Maximum warpage: 0.7 mm (0.0276 in.)
If the warpage is greater than the maximum, replace the exhaust manifold
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст