Toyota Tundra. Manual — part 2892
Fig. 441: Identifying Clutch Balancer & Direct Clutch Return Spring Sub-Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Remove the No. 2 clutch balancer and direct clutch return spring sub-assembly from the direct
clutch piston.
Fig. 442: Identifying No. 2 Clutch Balancer & Direct Clutch Return Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f. Remove the 2 O-rings from the direct clutch piston.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 443: Identifying Direct Clutch Piston & O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
58. INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY (See INSPECTION )
59. REMOVE NO. 3 BRAKE SNAP RING
a. Using a screwdriver, remove the No. 3 brake snap ring from the transmission case.
Fig. 444: Using Screwdriver To Remove No. 3 Brake Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
60. REMOVE NO. 3 BRAKE DISC SET
a. Remove the 2 flanges, 4 discs and 3 plates from the transmission case.
Fig. 445: Identifying Flanges, Discs & Plates
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
61. INSPECT NO. 3 BRAKE DISC (See INSPECTION )
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
62. REMOVE NO. 3 BRAKE PISTON HOLE SNAP RING
a. Using SST, remove the snap ring.
SST 09350-30020 (09350-07060)
Fig. 446: Using SST To Remove No. 3 Brake Piston Hole Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
63. REMOVE NO. 3 BRAKE CYLINDER WITH NO. 3 BRAKE PISTON AND NO. 3 BRAKE
PISTON RETURN SPRING SUB-ASSEMBLY
a. Remove the No. 3 brake cylinder with the No. 3 brake piston and No. 3 brake piston return spring
from the transmission case.
Fig. 447: Identifying No. 3 Brake Cylinder With No. 3 Brake Piston & Return Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
64. REMOVE NO. 3 BRAKE PISTON
a. Using SST and a press, compress the return spring and remove the snap ring and No. 3 brake piston
return spring with a screwdriver.
SST 09380-60010 (09381-06020, 09381-06040, 09381-06060, 09381-06100, 09381-06110)
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 448: Compressing Return Spring Using SST & Press
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Hold the No. 3 brake piston and apply compressed air (392 kPa, 4.0 kgf/cm
2
, 57 psi) to the No. 3
brake cylinder to remove the No. 3 brake piston.
Fig. 449: Applying Compressed Air To No. 3 Brake Cylinder
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the 2 O-rings from the No. 3 brake piston.
Fig. 450: Identifying No. 3 Brake Piston O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
65. INSPECT NO. 3 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY (See INSPECTION )
66. REMOVE 1-WAY CLUTCH ASSEMBLY WITH 1-WAY CLUTCH INNER RACE SUB-
ASSEMBLY
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст