Toyota Tundra. Manual — part 2330
Fig. 152: Identifying Oil Filter Bracket With Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSTALL OIL COOLER ASSEMBLY
a
Apply a light coat of engine oil to 2 new O-rings
b
Install the 2 O-rings to the oil cooler
Fig. 153: Identifying O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Install the oil cooler with the 5 nuts
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
Fig. 154: Identifying Oil Cooler Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
3
INSTALL OIL FILTER BRACKET
a
Apply a light coat of engine oil to 2 new O-rings
b
Install the 2 O-rings to the timing chain cover
Fig. 155: Identifying Timing Chain Cover O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Install the oil filter bracket with the 2 nuts and 2 bolts
Torque: 35 N*m (357 kgf*cm, 26 ft.*lbf)
Fig. 156: Identifying Oil Filter Bracket With Nuts And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4
INSTALL NO. 1 OIL COOLER BRACKET
a
Connect the ground wire to the cylinder block
b
Install the oil cooler bracket with the 2 nuts
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Fig. 157: Identifying Oil Cooler Bracket With Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5
INSTALL NO. 2 WATER BYPASS PIPE
a
Connect the 4 hoses
b
Install the water bypass hose with the 3 bolts
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 158: Identifying Water Bypass Hose With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6
CONNECT COOLER COMPRESSOR ASSEMBLY (see INSTALLATION )
7
INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY (see INSTALLATION )
8
INSTALL OIL FILTER ELEMENT (see REPLACEMENT )
9
INSTALL FAN AND GENERATOR V BELT (See INSTALLATION )
10
ADD ENGINE OIL (see REPLACEMENT )
11
ADD ENGINE COOLANT (See REPLACEMENT )
12
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
13
INSPECT FOR OIL LEAK (see REPLACEMENT )
14
CHECK ENGINE OIL LEVEL (see LUBRICATION SYSTEM )
15
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )
16
INSTALL NO. 1 ENGINE UNDER COVER (see REPLACEMENT )
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст