Toyota Tundra. Manual — part 1065
Fig. 107: Applying MP Grease To Spider And Bearings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Measure dimension A between the snap ring grooves.
Fig. 108: Identifying Dimension A Between Snap Ring Grooves
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the 4 spider bearings to the spider journal portions, and then measure dimension B of the
universal joint.
d. w/o Grease Fitting Spider Bearing:
1. Select snap rings to make dimensions A and B the same.
Fig. 109: Identifying Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Snap ring type for steel yoke
NOTE:
When measuring dimension B, fix the spider and spider bearings in a
vise and hold them firmly together.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
THICKNESS CHART
Snap ring type for aluminum yoke
THICKNESS CHART
e. w/ Grease Fitting Spider Bearing:
1. Select snap rings to make dimensions A and B the same.
Fig. 110: Identifying Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Snap ring type
THICKNESS CHART
Color Thickness
Purple 1.46 mm (0.0574 in.)
Black 1.49 mm (0.0586 in.)
Copper 1.51 mm (0.0594 in.)
White 1.56 mm (0.0614 in.)
Yellow 1.59 mm (0.0625 in.)
Blue 1.64 mm (0.0646 in.)
Color
Thickness
Black 1.52 mm (0.0598 in.)
Black 1.54 mm (0.0606 in.)
Black 1.57 mm (0.0618 in.)
Black 1.62 mm (0.0638 in.)
NOTE:
Use new snap rings.
If possible, use snap rings of the same thickness for both
sides.
Color
Thickness
Black 1.49 mm (0.0586 in.)
Copper 1.51 mm (0.0594 in.)
White 1.56 mm (0.0614 in.)
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
f. Temporarily install the universal joint spider and 2 universal joint spider bearings into the propeller
shaft yoke.
g. Using SST, press the universal joint spider bearing into the propeller shaft yoke until the groove
can be seen.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04020, 09955-04051, 09957-
04010), 09950-60010 (09951-00290), 09336-16010
Fig. 111: Pressing Universal Joint Spicier Bearing Into Propeller Shaft Yoke
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
h. Using needle-nose pliers, install the previously selected snap ring into the groove of the yoke.
HINT:
Use the same installation procedure for the universal joint spider bearing on the opposite side.
Yellow 1.59 mm (0.0625 in.)
NOTE:
Use new snap rings.
If possible, use snap rings of the same thickness for both
sides.
NOTE:
Confirm that the universal joint spider moves smoothly while
pressing in the bearing.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 112: Identifying Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
i. Align the matchmarks on the propeller shaft yoke and universal joint yoke, and temporarily install
the spider and 2 universal joint spider bearings into the universal joint yoke.
j. Using SST, press the universal joint spider bearing into the universal joint yoke until the groove
can be seen
SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04020, 09955-04051, 09957-
04010), 09950-60010 (09951-00290), 09336-16010
Fig. 113: Pressing Universal Joint Spider Bearing Into Universal Joint Yoke
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
k. Using needle-nose pliers, install the previously selected snap ring into the groove on the universal
joint yoke.
HINT:
Use the same installation procedure for the universal joint spider bearing on the opposite side.
4. INSTALL PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
a. Check the spider bearings for wear and damage.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст