Toyota Tundra. Manual — part 1004
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL LH
2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH (See COMPONENTS )
3. REMOVE REAR DISC LH (See REMOVAL )
4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING LH (See COMPONENTS )
5. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH (See COMPONENTS )
6. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH (See COMPONENTS )
7. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY LH (See DISASSEMBLY )
8. REMOVE REAR AXLE LH HUB BOLT
a. Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.
SST 09650-17011
Fig. 37: Holding Axle Hub Using SST
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
9. INSTALL REAR AXLE LH HUB BOLT
a. Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.
b. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the
hub bolt head touches the axle hub.
NOTE:
Install hub nuts to prevent damage to the hub bolts.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Axle - Tundra
Fig. 38: Removing Axle Hub Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the washer and hub nut.
10. INSTALL PARKING BRAKE SHOE LEVER SUB-ASSEMBLY LH (See INSPECTION )
11. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH (See REASSEMBLY )
12. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH (See REASSEMBLY )
13. INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING LH (See REASSEMBLY )
14. CHECK PARKING BRAKE INSTALLATION (See REASSEMBLY )
15. INSTALL REAR DISC LH (See INSTALLATION )
16. ADJUST PARKING BRAKE SHOE CLEARANCE (See REASSEMBLY )
17. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH (See REASSEMBLY )
18. INSTALL REAR WHEEL LH
Torque: for Aluminum Wheel
131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel
209 N*m (2131 kgf*cm, 154 ft.*lbf)
19. CHECK PARKING BRAKE TRAVEL (See ADJUSTMENT )
20. ADJUST PARKING BRAKE TRAVEL (See ADJUSTMENT )
REAR AXLE SHAFT
COMPONENTS
NOTE:
Do not damage the threads of the hub bolts.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Axle - Tundra
Fig. 39: Identifying Rear Axle Shaft Components With Torque Specifications (1 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Axle - Tundra
Fig. 40: Identifying Rear Axle Shaft Components With Torque Specifications (2 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Axle - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст