Toyota Tundra. Manual — part 2231
6. Disconnect the throttle sensor connector.
7. Disconnect the oil pressure sender gauge connector.
8. Disconnect the 7 clamps.
Fig. 228: Locating Engine Wire Connectors - RH Side
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Engine Rear Side:
1. Disconnect the 2 air switching valve connectors.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 229: Locating Air Switching Valve Connectors And Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. Disconnect the 5 clamps.
3. Remove the 3 bolts and disconnect the 3 wires.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
d. Remove the engine wire.
2. REMOVE FUEL TUBE SUB-ASSEMBLY
a. Remove the fuel tube (See FUEL SYSTEM ).
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 230: Identifying Fuel Tube
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. REMOVE CYLINDER BLOCK WATER DRAIN COCK SUB-ASSEMBLY
a. Remove the 2 water drain cock plugs from the water drain cocks.
Fig. 231: Locating Water Drain Cock Plugs
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст