Toyota Tundra. Manual — part 2316
3
DRAIN ENGINE OIL (see REPLACEMENT )
4
DRAIN ENGINE COOLANT (See REPLACEMENT )
5
REMOVE RADIATOR ASSEMBLY
a
Remove the radiator (See REMOVAL )
6
REMOVE AIR CLEANER HOSE ASSEMBLY (See REMOVAL )
7
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
8
DISCONNECT ENGINE WIRE
a
Engine Room LH Side:
1
Remove the engine room relay block cover
Fig. 36: Identifying Engine Room Relay Block And Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
Disconnect the 2 connectors and detach the 2 clamps from the engine room junction block
3
Disconnect the 4 air injection control driver connectors
Fig. 37: Identifying Air Injection Control Driver Connectors
(see INITIALIZATION ).
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
the negative (-) battery terminal.
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4
Disconnect the 2 wire harness clamps
Fig. 38: Identifying Wire Harness Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5
Disconnect the injector connector
6
Disconnect the 4 ignition coil connectors
Fig. 39: Identifying Ignition Coil Connectors And Injector Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7
Disconnect the 2 VVT sensor connectors
8
Disconnect the 4 clamps
9
Remove the 2 bolts and ground wire
10
Disconnect the noise filter connector
11
Disconnect the engine coolant temperature sensor connector
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Fig. 40: Identifying Engine Coolant Temperature Sensor Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12
Disconnect the 2 camshaft timing oil control valve connectors
13
Disconnect the camshaft position sensor connector
14
Disconnect the 3 clamps
15
Disconnect the cooler compressor connector
b
Engine Room RH Side
1
Disconnect the 2 camshaft timing oil control valve connectors
2
Disconnect the 4 ignition coil connectors
3
Disconnect the injector connector
4
Disconnect the 2 VVT sensor connectors
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Fig. 41: Identifying Ignition Coil Connectors And VVT Sensor Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5
Disconnect the noise filter connector
6
Remove the 2 bolts and ground wire
7
Disconnect the 2 air pump connectors
8
Disconnect the throttle position sensor and throttle control motor connector
9
Disconnect the 5 clamps
c
Disconnect the 2 clamps and power steering oil pressure switch connector
d
for 4WD:
Disconnect the clamp and junction connector
Fig. 42: Identifying Clamp And Junction Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
9
REMOVE INTAKE MANIFOLD
a
Remove the intake manifold (See REMOVAL )
10
DISCONNECT AIR PUMP HOSE AND WIRE HARNESS
a
Disconnect the No 2 and No 3 air hoses
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст