Toyota Tundra. Manual — part 1050
Fig. 3: Identifying Propeller Shaft Assembly Components (3 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 4: Identifying Propeller Shaft Assembly Components With Torque Specification (4 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE PROPELLER SHAFT ASSEMBLY (for 2 Joint Type)
a. Place matchmarks on the propeller shaft flange and differential flange.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 5: Identifying Matchmarks On Propeller Shaft Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 4 bolts and 4 nuts. Then disconnect the propeller shaft from the differential side.
c. Remove the propeller shaft.
d. Insert SST into the transmission to prevent oil leakage.
SST 09325-40010
Fig. 6: Inserting SST Into Transmission
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Insert SST into the transmission to prevent oil leakage.
SST 09325-60010
Fig. 7: Inserting SST Into Transmission
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for 3 Joint Type)
a. Place matchmarks on the propeller shaft flange and differential flange.
Fig. 8: Identifying Matchmarks On Propeller Shaft Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 4 bolts and 4 nuts. Then disconnect the propeller shaft from the differential side.
c. w/o Bearing Washer:
1. Remove the 2 mounting bolts from the crossmember.
Fig. 9: Locating Crossmember Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. w/ Bearing Washer:
1. Remove the 2 mounting bolts and 2 bearing washers from the crossmember.
e. Remove out the propeller shaft.
f. Insert SST into the transmission to prevent oil leakage.
SST 09325-40010
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст