Toyota Tundra. Manual — part 237
c. for CrewMax:
Install the front door scuff plate LH (see INSTALLATION ).
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
STEREO COMPONENT AMPLIFIER
COMPONENTS
Fig. 309: Identifying Stereo Component Amplifier Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
2. REMOVE FRONT SEAT ASSEMBLY RH
a. for Manual Seat:
Remove the front seat RH (see REMOVAL ).
b. for Power Seat:
Remove the front seat RH (see REMOVAL ).
3. REMOVE AUDIO AMPLIFIER COVER
a. Detach the 3 clips and remove the cover.
Fig. 310: Locating Audio Amplifier Cover Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
a. Disconnect the 3 connectors.
b. Remove the 3 bolts and amplifier.
NOTE:
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
the negative (-) battery terminal.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 311: Locating Stereo Component Amplifier Assembly Connectors And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
a. Set the bracket's aligning protrusion labeled A into the floor's hole.
b. Install the amplifier with the 3 bolts.
HINT:
Tighten the bolts in the order shown in the illustration.
Fig. 312: Locating Stereo Component Amplifier Assembly Connectors And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Connect the 3 connectors.
2. INSTALL AUDIO AMPLIFIER COVER
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
a. Set the cover on the stereo amplifier assembly.
b. Attach the 3 clips.
Fig. 313: Locating Audio Amplifier Cover Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL FRONT SEAT ASSEMBLY RH
a. for Manual Seat:
Install the front seat RH (see INSTALLATION ).
b. for Power Seat:
Install the front seat RH (see INSTALLATION ).
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
FLOOR SPEAKER (FOR DOUBLE CAB)
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст