Toyota Tundra. Manual — part 2159
Fig. 121: Identifying Fuel Sender Gauge Assembly Components With Torque Specifications (2 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Fig. 122: Identifying Fuel Sender Gauge Assembly Components With Torque Specification (3 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Fig. 123: Identifying Fuel Sender Gauge Assembly Components (4 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
a. Remove the fuel suction with pump and gauge tube (see REMOVAL ).
2. REMOVE FUEL SENDER GAUGE ASSEMBLY
a. Disconnect the fuel sender gauge connector.
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Fig. 124: Identifying Fuel Sender Gauge Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
Fig. 125: Pressing Down On Sender Gauge Claw Labeled A
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
a. Check that the float moves smoothly between F and E.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FUEL SENDER GAUGE ASSEMBLY STANDARD RESISTANCE
Tester Connection
Condition
Specified Condition
2-3
Float level is F (upper)
12 to 18 ohms
Float level is E (lower)
405 to 415 ohms
2009 Toyota Tundra
2009 ENGINE Fuel (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст