Toyota Tundra. Manual — part 2084
HINT:
If the fuel injectors do not rotate smoothly, replace the O-ring of the injector that does not rotate
smoothly
d
Position the fuel injector connectors facing outward
Fig. 37: Positioning Fuel Injector Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e
Tighten the 6 bolts, which are used to hold the fuel delivery pipe, to the intake manifold
Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf)
f
Connect the 6 fuel injector connectors
3
CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
a
Push the tube connector into the pipe until the tube connector makes a "click" sound
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Fig. 38: Pushing Tube Connector Into Pipe
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Install the fuel pipe clamp
4
CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
a
Push the tube connector into the pipe until the tube connector makes a "click" sound
NOTE:
Check if there is any damage or foreign objects on the
connected part of the fuel pipe.
After connecting, check that the pipe and connector are
securely connected by pulling them.
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Fig. 39: Pushing Tube Connector Into Pipe
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Install the fuel pipe clamp
5
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
6
INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT (See INSTALLATION )
7
INSTALL AIR CLEANER HOSE (See INSTALLATION )
8
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9
ADD ENGINE COOLANT (See REPLACEMENT )
10
CHECK FOR FUEL LEAK
a
Connect the Techstream to the DLC3
b
Turn the ignition switch ON and Techstream main switch ON
NOTE:
Check if there is any damage or foreign objects on the
connected part of the fuel pipe.
After connecting, check that the pipe and connector are
securely connected by pulling them.
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
NOTE:
Do not start the engine.
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
c
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump /
Speed
d
Check that there are no fuel leaks after doing maintenance anywhere on the fuel system
11
CHECK FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
12
INSTALL V-BANK COVER (See INSTALLATION )
13
INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
14
INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
a
Install the front wiper motor and link (see INSTALLATION )
15
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
FUEL PRESSURE REGULATOR
COMPONENTS
2009 Toyota Tundra
2009 ENGINE Fuel (1GR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст