Toyota Tundra. Manual — part 993
a. Install the tension spring.
Fig. 39: Identifying Tension Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
16. INSTALL PARKING BRAKE SHOE LEVER RH
HINT:
Use the same procedures described for the LH side.
17. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
18. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
19. INSTALL PARKING BRAKE SHOE RETURN SPRING RH
HINT:
Use the same procedures described for the LH side.
20. CHECK PARKING BRAKE INSTALLATION (see REASSEMBLY )
21. INSTALL REAR DISC RH
HINT:
Use the same procedures described for the LH side.
22. ADJUST PARKING BRAKE SHOE CLEARANCE (see REASSEMBLY )
2009 Toyota Tundra
2009 BRAKES Parking Brake - Tundra
23. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
24. INSTALL REAR WHEEL RH Torque: for aluminum wheel
131 N*m (1336 kgf*cm, 97 ft.*lbf)
for steel wheel
209 N*m (2131 kgf*cm, 154 ft.*lbf)
25. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 3220 mm [10 ft. 6.8 in.] Wheelbase
Type)
a. Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
b. Install the No. 1 parking brake cable to the inside of the vehicle with the 2 bolts (labeled B).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
c. Connect the clamp (labeled C) to the No. 1 parking brake cable.
d. Install the clamp with the nut (labeled D).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
e. Install the No. 1 parking brake cable and cable retainer with the bolt (labeled E).
Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf)
2009 Toyota Tundra
2009 BRAKES Parking Brake - Tundra
Fig. 40: Identifying No. 1 Parking Brake Cable And Cable Retainer Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f. Temporarily install the adjustment nut and lock nut (labeled F).
HINT:
The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL
TRAVEL" procedure.
26. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 3700 mm [12 ft. 1.7 in.] Wheelbase
Type)
a. Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
b. Install the No. 1 parking brake cable to the inside of the vehicle with the 2 bolts (labeled B).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
c. Connect the 2 clamps (labeled C) to the No. 1 parking brake cable.
d. Install the 2 clamps with the 2 nuts (labeled D).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
NOTE:
Do not bend and twist the parking brake cable.
2009 Toyota Tundra
2009 BRAKES Parking Brake - Tundra
e. Install the No. 1 parking brake cable and cable retainer with the bolt (labeled E).
Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf)
f. Temporarily install the adjustment nut and lock nut (labeled F).
HINT:
The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL
TRAVEL" procedure.
Fig. 41: Identifying No. 1 Parking Brake Cable And Cable Retainer Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
27. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 4180 mm [13 ft. 8.6 in.] Wheelbase
Type)
a. Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
b. Install the No. 1 parking brake cable to the inside of the vehicle with the 2 bolts (labeled B).
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
NOTE:
Do not bend and twist the parking brake cable.
2009 Toyota Tundra
2009 BRAKES Parking Brake - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст