Toyota Tundra. Manual — part 339
If confirmation mode or prohibition mode is selected, the operation ends after the response to
the selected mode completes.
f. If add mode or rewrite mode is selected, perform the following procedures.
1. Press a single switch (LOCK or UNLOCK) within 5 seconds.
2. After completing the above step, check the response to the registration completion within 3
seconds.
Fig. 56: Register Recognition Code (Using Switch Operation) (Completion)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
If the LOCK-UNLOCK operation occurs twice, the registration of the recognition code
has failed. Perform registration procedures again from the beginning.
If registering another transmitter, repeat the procedures after the response to the
selected mode confirmation. All 4 recognition codes can be registered consecutively.
g. Perform either of the following to complete the registration of the recognition codes:
Open the door.
Insert the key into the ignition key cylinder.
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
The following items can be customized.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
a. Connect the Techstream to the DLC3.
b. Turn the ignition switch ON.
c. Turn the tester ON.
d. Enter the following menus:
Techstream - Select: Customize Setting.
e. Select the setting by referring to the table below.
Techstream
Main Body
TECHSTREAM DATA LIST - MAIN BODY
NOTE:
When the customer requests a change in a function, first make sure
that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is
set to the default setting.
Display
Default
Contents
Setting
Hazard
Answer
Back
ON
When LOCK switch on transmitter is pressed, all
hazard warning lights illuminate once. When UNLOCK
switch is pressed, all hazard warning lights illuminate
twice.
ON / OFF
Wireless
Buzzer Resp
ON
Function that makes wireless buzzer sound for answer-
back when transmitter LOCK / UNLOCK switch is
pressed.
ON / OFF
Open Door
Warning
ON
If door is not completely closed and transmitter LOCK
switch is pressed, this function sounds a buzzer for 10
seconds.
ON / OFF
Wireless
Control
ON
ON / OFF of wireless door lock function.
ON / OFF
Panic
Function
ON
Operates security alarm when PANIC switch on
transmitter is continuously pressed for 1 second.
ON / OFF
Unlock / 2
Operation
ON
Function that unlocks driver side door when unlock
switch on transmitter is pressed once, and unlocks all
doors when pressed twice. If setting is OFF, pressing
unlock switch once makes all doors unlock.
ON / OFF
Wireless
Auto Lock
ON
Function to control automatic relocking of doors after
unlocking with wireless door lock function.
ON / OFF
Auto Lock
Time
30
seconds
Function to change time until relocking after unlocking.
60
seconds/30
seconds
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
PROBLEM SYMPTOMS TABLE
HINT:
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Wireless door lock control system
SYMPTOM CHART
TERMINALS OF ECU
1. CHECK MAIN BODY ECU
Symptom
Suspected Area
Refer To
Only wireless control function is
inoperative
Proceed to "Only Wireless
Control Function is Inoperative"
ONLY WIRELESS CONTROL
FUNCTION IS INOPERATIVE
No answer-back
Proceed to "No Answer-Back"
NO ANSWER-BACK
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Fig. 57: Identifying Terminals Of ECU
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Disconnect the DD and DB ECU connectors.
b. Measure the resistance and voltage according to the value(s) in the table below.
MAIN BODY ECU RESISTANCE AND VOLTAGE
Terminal No. (Symbols)
Wiring Color
Terminal
Condition
Specified
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Door Lock - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст