Toyota Tundra. Manual — part 2267
Fig. 56: Identifying V-Bank Cover Hooks From Bracket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. REMOVE AIR CLEANER HOSE ASSEMBLY
a. Disconnect the vacuum hose and ventilation hose.
b. Loosen the 2 clamps.
c. Remove the air cleaner hose.
Fig. 57: Identifying Air Cleaner Hose With Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. REMOVE AIR CLEANER ASSEMBLY
a. Remove the air cleaner cap.
1. Disconnect the MAF meter connector.
2. Using a clip remover, detach the wire harness clamp.
3. Unfasten the 4 hook clamps and then remove the air cleaner cap.
b. Remove the air cleaner element.
2009 Toyota Tundra
2009 ENGINE Intake (3UR-FE) - Tundra
Fig. 58: Identifying Air Cleaner Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the 2 bolts and air cleaner case.
Fig. 59: Identifying Air Cleaner Case With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. REMOVE VENTILATION HOSE ASSEMBLY
a. Disconnect the ventilation hose from the ventilation pipe of the cylinder head cover LH and RH.
b. Remove the 2 bolts and ventilation hose.
2009 Toyota Tundra
2009 ENGINE Intake (3UR-FE) - Tundra
Fig. 60: Identifying Ventilation Hose And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1. INSTALL VENTILATION HOSE ASSEMBLY
a. Install the ventilation hose with the 2 bolts.
Torque: for bolt A
21 N*m (214 kgf*cm, 15ft.*lbf)
for bolt B
10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 61: Identifying Ventilation Hose With Bolts
2009 Toyota Tundra
2009 ENGINE Intake (3UR-FE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Connect the ventilation hose to the ventilation pipe of the cylinder head cover LH and RH.
2. INSTALL AIR CLEANER ASSEMBLY
a. Install the air cleaner case with the 2 bolts.
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
Fig. 62: Identifying Air Cleaner Case With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the air cleaner element onto the air cleaner case.
c. Install the air cleaner cap.
1. Fasten the 4 hook clamps.
2. Connect the MAF meter connector.
3. Attach the wire harness clamp.
2009 Toyota Tundra
2009 ENGINE Intake (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст